Flag fabric 110 g/m² – custom printing and finishing available

Flag fabric is a closed fabric made of polyester, which can be printed in high quality. Flag fabrics are characterised by their low weight and good (30%) wind and light permeability as well as tear resistance .

If flag fabric is traditionally made into flags, banners and beachflags for outdoor use, the printed fabric is weatherproof and UV-resistant – as a cloth banner or advertising flag for indoor use, flag fabric is certified as flame-retardant (B1 according to DIN 4102).

Our configurator offers you several options for finishing: Flag fabric can be easily cut, sewn, eyeleted and/or hemmed (hemstitch).

Please note: Motifs for individual advertising flags / advertising banners made of flag fabric are printed on one side. The material offers approx. 60% print-through, which means that the print also appears (mirror-inverted) on the reverse side of the fabric.

Looking for finished products made from this material? Click here to go directly to the ready-made flags and beachflags.

Our tip: Order the basic print data check at the same time! We will then check your print data in advance and you will receive the product safely in the desired quality.

Order printed flag fabric – here's how:

With our configurator, you can configure flag fabric yourself in just a few clicks, and we will then print your desired product according to your specifications.

Give each individual flag fabric a name (optional) – this name will appear on all documents and you will always have an overview.
Specify the width and height.
Select the desired finishing for the top, bottom and side edges – you can choose from a range of standard finishes.
Save the product.
Then add your finished flag fabric to your shopping basket and complete your purchase or add another item.
After successful purchase, you will receive an order confirmation and a link to our data sheet, which contains important information regarding the creation and transmission of your print data.
You will then receive a second email with an order confirmation and a personalised link for uploading your print data.
The order confirmation also contains the expected delivery date*.
Note on print data checking: If you have booked our basic print data check, we will automatically make minor corrections for you. If the resolution or similar is not correct, we will actively contact you.
If you have not booked the print data check, we cannot guarantee the output quality of your prints.
Optionally, you can book our personal premium graphics service. This is charged separately according to time and effort (€44.50 per half hour or part thereof). Please leave us a short note in the order comments at the end of your order.
The flag fabric will be shipped to you after production.

*Exception for payment in advance: In this case, we will only start production of your printed materials after receipt of payment. The delivery date is therefore dependent on receipt of payment.

Please ensure that your print data is carefully prepared. Confirmed print orders are custom-made and cannot be exchanged.

Do you have any questions, require a customised product or would like personal advice?

Do you have questions about the material? Or haven't found the desired packaging? Would you like the flag fabric, e.g. as a cover in a special format or a ceiling hanger with special packaging? Or are you looking for a different material?

Please contact us, our team will be happy to advise you personally at +49 89-122 89 06 22 or info@allbuyone.com

Customised finishing: simple cut, with hemstitching, eyelets and much more – anything is possible

Whether classically sewn into flags, banners and beachflags or sewn into flag fabrics for custom-fit banners and covers for decorative purposes – our configurator offers you several standard options to choose from.

The following options are available (a detailed explanation of all types of finishing can be found below):

Cut and hemmed:

Cut (straight cut edge)
hemmed with double safety seam
hemmed with trim tape
hemmed with binding tape and eyelets (only in the corners)
hemmed with binding tape and eyelets (every 50 cm)

With flat hem:

4 cm flat hemstitch (for diameters up to 2 cm)
8 cm flat hemstitching (for diameters up to 4 cm)
10 cm flat hemstitching (for diameters up to 5 cm)

Are you looking for a different finish for your flag fabric, or are you looking for flags or banners made from a different material? No problem, please get in touch with us and we will be happy to advise you personally.

Flag fabric – the most important properties at a glance

Wind permeability: 30%
Opacity: low
UV resistance: 0.5 - 2 years UV resistant (depending on exposure)
B1 flame retardant: yes
Printing: single-sided
Print quality: high resolution, colour-intensive 6c digital print, sublimation print
Max. seamless print width: 3.1 m (final dimensions including hem and eyelets)

Flag fabric can be printed seamlessly up to a width of 3.1 m. Larger formats are also possible without any problems; these are sewn together on the reverse side.

Print quality of flag fabric: You design, we print in high-quality digital print

Fabrics absorb well, resulting in particularly rich and brilliant colours when printing on textile materials . We print flag fabric in high-resolution 6c digital printing using thermal sublimation printing. The ink is printed onto the fabric and then vaporised with heat to make it extremely durable. The result is a colour-intensive print image with perfect print-through. We can print flag fabric seamlessly up to a width of 3.10 m. Larger formats are sewn together on the reverse side.

Flag fabric is printed on one side, but thanks to approx. 60% print-through , the print is visible on both sides, although it is mirror-inverted on the reverse and the colours are slightly less intense. The material is translucent: how visible the print motif is on the reverse therefore depends on the lighting. The surface of the flag fabric is silk matt and non-reflective.

Customised flag fabric – all finishing options explained simply

Customised flag fabric, individually manufactured and tailored to your requirements – with our configurator, you can create the flag fabric you need. Here you will find the various options explained in simple terms:

Flag fabric cut with straight edges

Here you can get the flag fabric simply cut with straight edges. This finish is particularly suitable if you want to use the flag fabric to cover wooden structures, for example, or if you want to staple it to wooden panels.

Please note: simply cut, unhemmed flag fabric may fray or tear. The material should not be exposed to strong tensile loads.

Flag fabric hemmed with double safety seam

With this finish, the flag fabric is hemmed and the hem is sewn with a double safety seam. The fabric is folded over twice (double hemmed) and fixed on the back with two parallel seams. The double safety seam makes the hem particularly secure and protects the fabric from fraying. We recommend this finish for textile banners and flags.

Flag fabric hemmed with trim tape

Here, the flag fabric is folded over once (single hemmed) and a reinforcing trim tape (textile tape) is sewn onto the back. The colour of the textile tape varies depending on the print colour and is selected by our print shop to match your print. The reinforcement with a trim tape provides the material with optimum protection against tearing. This finish is particularly suitable as edge reinforcement for cloth banners, ceiling hangers, coverings, textile banners and other banners that are stapled or attached with Holdon clips or similar. This finish is not suitable as side edge reinforcement for flags, as it makes the flag unnecessarily heavy.

Flag fabric hemmed with edging tape and eyelets (only in the corners)

With this finish, the flag fabric is simply hemmed as described above and reinforced with binding tape on the reverse side. In addition, the corners are eyeleted with metal eyelets (inner diameter of the eyelets: 12 mm). This finish is ideal for flags and cloth banners, it serves to reinforce the side edges and protects the eyelets from tearing.

Flag fabric hemmed with binding tape and eyelets (at intervals of 50 cm)

The flag fabric is simply hemmed, reinforced with binding tape on the back and eyeleted with metal eyelets every 50 cm along the selected edge (inner diameter of the eyelets: 12 mm). The trim tape provides optimum protection against tearing for the eyelet edge. We recommend this finish for flags and larger cloth banners, as the eyelets every 50 cm allow the banner to be attached tightly and without creases.

Flag fabric with hemstitching 4 cm, 8 cm or 10 cm wide

Hemstitching is one of the most popular finishes for flag fabric. This finish is ideal for flags, but also for banners. There are three different diameters to choose from, each measured on the flat hemstitch:

The 4 cm wide hemstitching is ideal for ropes and thin wooden and metal poles with a diameter of up to 2 cm.
We recommend the 8 cm wide hemstitching for hoist flags with a boom as well as thicker poles and ropes with a diameter of up to 4 cm.
The 10 cm wide hem is ideal for pipes (ø 50 mm) and Layher rods (ø 48.3 mm) as well as for roof battens (max. 3 x 6 cm).

It is difficult to give a general recommendation as to which finish is best for flag fabric, as the material is used not only for flags but also for many other products. We recommend that hoist flags intended for a flagpole with a boom (gallows) be finished with a hemstitch at the top edge and eyelets on one side edge. To attach the flag, the boom is inserted into the hemstitching and the flag is fastened to the flagpole at the sides with thick cable ties (min. 7.6 x 370 mm) through the eyelets.

Can't find the finish you're looking for? Would you like a different finish? You can find the most popular configurations in our configurator. Many other finishes are available on request. Please contact us and we will manufacture your material in almost any conceivable form. We would be happy to advise you personally on +49 89-122 89 06 22

Flag fabric: The material and its properties

Flag fabric is a lightweight but sturdy polyester fabric. The material is tear-resistant and impresses with its durability and weather resistance. Here are some more properties:

Type: Flag fabric B1
Material: polyester fabric (100% polyester)
Weight (grammage): 110 g/m²
Surface: silk matt
Wind permeability: approx. 30%
Light transmission: high
Sound permeability: high
Weather resistance: 0.5 - 2 years (depending on exposure)
UV stability: 0.5 - 2 years (depending on exposure)
Feel: textile, flexible, soft, flowing
Durability: tear-resistant, hard-wearing (depending on how it is made and where it is used)
Washability: washable at 30°C (caution: B1 protection is lost!)
Print quality: high resolution, very good quality, intense colours
Printing technology: 6c digital printing, sublimation printing (thermal printing)
Print: single-sided
Print penetration approx. 60%
Max. seamless print width: 3.10 m (final dimensions including hem and eyelets)
Fire class: B1 flame retardant according to DIN 4102

We print flag fabric seamlessly up to a width of 3.10 m ( ). Larger formats are also no problem; these are sewn together from individual panels on the reverse side.

Note: The information on weather and UV resistance has been determined in studies under Central European conditions. Use in regions with different climatic conditions (high humidity, strong UV radiation), such as in southern European countries, tropical areas and desert regions, as well as in areas with high air pollution or at high altitudes, will cause a faster ageing process.

Open words: How durable is flag fabric?

Our flag fabric is a lightweight yet very stable, weatherproof and high-quality material of outstanding quality, which gives our customers great pleasure in both indoor and outdoor use.

Please note regarding UV and weather resistance

Many manufacturers specify a blanket 3-year guarantee for UV resistance and weather resistance. This is true if the fabric is used exclusively indoors. However, this specification is not always realistic for outdoor use. If flag fabric is used as a flag or banner at heights of 10 m or more and exposed to sun, wind and weather for long periods of time, this is definitely not the case. Weather and mechanical effects from strong winds can cause material wear. We therefore find it difficult to make a general statement. To be on the safe side, we specify 0.5-2 years of UV resistance and weather resistance!

Information on care, delivery and storage of flag fabric

Flag fabric is easy to care for and washable at 30°C (mild detergent, gentle cycle). It can be ironed at low temperatures. However, please note that washing and ironing will cause the material to lose its flame retardancy. The flag fabric will only regain its B1 rating after being re-impregnated with flame retardants.

Flag fabric is delivered folded as standard. On request, it can also be shipped rolled on a core. For crease-free storage, we recommend folding or rolling up the flag fabric loosely. Make sure that the fabric is completely dry to prevent mould from forming.

What alternatives are there to flag fabric?

, we recommend polymesh as an even more wind-permeable alternative. This polyester fabric also has a grammage of 110 g/m², but a different material structure, namely perforated mesh. The perforated structure makes polymesh much more air-permeable than flag fabric, flutters less and is particularly suitable for coastal regions or areas with strong winds.

Application of flag fabric: What is the material suitable for?

As the name suggests, flag fabric is mostly used for:

Advertising flags
Flag
hoist flag
Beachflags

Note: We recommend taking flags down outdoors in strong winds.

However, the air-permeable, weatherproof and extremely stable material with excellent print quality is also suitable for many other applications. We have already manufactured flag fabric for:

Cloth banners for decoration and advertising
Side and ceiling hangers for exhibition stands, POS and much more
Decorative coverings, truss coverings
Rank covers for sponsor advertising in concert halls/football stadiums
Rank covers for fan choreography in football stadiums (fan banners)
Translucent Kabuki curtain for special lighting effects
Stage banners (backdrops) on molton backgrounds
and much more

Conclusion: Flag fabric – much more than just a fabric for flags, banners and beachflags

Flag fabric is much more than just a fabric for flags. Are you looking for a lightweight, permeable material that looks good even in wind and weather? Or would you like a product that can be backlit with exciting lighting effects? And one that also has an excellent print image with rich, vibrant colour reproduction? Then this offer is the perfect choice for you.

Buy printed flag fabric: low prices, fast shipping from the event supplies specialist

We print flag fabric quickly and reliably in high quality – at fair prices with fast shipping. Would you like personal advice for all your printing needs? We are happy to assist you personally at +49 89-122 89 06 22.

Volume	Price
from 10 m²	13,40 €^*
from 50 m²	12,90 €^*
from 100 m²	12,50 €^*
from 250 m²	12,30 €^*

Material:	flag fabric 110 g/m²
Quality:	flame retardant according to DIN 4102-B1
Characteristics:	visibility on backside ca. 60%
Print:	6-coloured digital print

110 g/m² | B1 flame retardant

1 First configure your desired individual pieces:

2Complete your configuration. We will determine the best price for you: