Phosphorising tape – adhesive tape that glows in the dark | 25 mm x 10 m | phosphor tape GT phos | phosphorescing duct tape, glow up to 10 h, waterproof, abrasion-resistant PVC tape, phosphorescing, very high adhesive strength, phosphor tape
Phosporising tape GT phos
Phosporising tape GT phos
| Dimensions: | 25 mm x 10 m |
|---|---|
| Type: | phosphorescent tape |
| Photoluminescent for: | approx. 10 hours |
Would you like to buy duct tape glow? Then you are in good hands with GT phos phosporising tape. This self-adhesive, phosphorescent tape glows in the dark for up to 10 hours after activation by artificial or natural light .
The luminous adhesive tape has high immediate adhesion and very high adhesive strength (7.6 N/cm), it adheres securely in a temperature range from +10°C to +80°C and can also be exposed to higher temperatures for short periods. The duct tape glow is very robust, particularly abrasion-resistant and waterproof when applied . The 0.36 mm thick, yet flexible PVC tape has a smooth, shiny surface. The colour of the adhesive tape is yellow in daylight, but glows green in the dark or under black light.
You can buy the duct tape glow in our shop at in a width of 25 mm with a length of 10 m - at a low price and with fast shipping within 24 hours.
| Dimensions: | 25 mm x 10 m |
|---|---|
| Type: | phosphorescent tape |
| Photoluminescent for: | approx. 10 hours |
Glow-in-the-dark adhesive tape – for use as marking tape, warning tape or for effects and decoration
GT phos phosporising tape is one of the high-quality glow-in-the-dark products – it impresses with its excellent luminosity under black light and in the dark. After charging under artificial or natural light, the phosphor tape is self-luminous for up to 10 hours.
Whether used for warning markings or as tape for effects and decoration, this tape glows extra brightly! The adhesive tape can be recharged as often as required.
Luminous adhesive tape: GT phos – Technical information
- Design: Phosporising tape (duct tape glow)
- Type: Phosphorus tape GT phos
- Brand: GRIP Eventbasics by allbuyone
- Base material: PVC tape with integrated phosphorous pigments; smooth, shiny surface
- Protective cover: Paper cover/release paper, which must be removed before application
- Adhesive: Acrylate
- Initial adhesion: high
- Adhesive strength: very high
- Adhesive strength on steel: 7.6 N/cm
- Elongation: 5
- Temperature range: +10°C to +80°C
- Water resistance: waterproof
- Conformability: good
- Abrasion resistance: very good
- Hand tear: no, the tape can be cut with a cutter or scissors
- Can be labelled
- Application: indoor and outdoor use, weatherproof
Colour and dimensions
- Colour: adhesive tape white/yellow, glows green in the dark
- Width: 25 mm
- Length: 10 m
- Thickness: 0.36 mm
Order more adhesive tapes from the allbuyone shop: Our GRIP "GT Neon" neon tapes and adhesive tapes from ProTapes (Pro Gaff, Spike Tape, Artist Tape) are also suitable as warning tape and marking tape, as well as for effects under UV light.
How does a self-illuminating phosporising tape work?
The duct tape glow contains photoluminescent pigments embedded in the PVC. When removed from a light source, the tape immediately emits a self-illuminating light and begins to glow green. When fully charged, the phosphorescent tape glows for up to 10 hours. The product can be reused indefinitely.
Difference: phosphorescent / fluorescent adhesive tape
Did you know? Phosphorescent "glow" is a special form of luminescence, also known as "cold glow". Phosphorescent substances are also referred to as luminophores. Phosphorescence differs from fluorescence in the following ways:
- Fluorescent adhesive tape does not glow on its own. The tape requires a light source (UV light, known as black light, with a wavelength of approx. 385 nm). When the light source is removed, the tape stops glowing quite quickly.
- Phosphorescent adhesive tape, on the other hand, glows strongly under UV light (black light) and appears to be able to store light. This results in independent afterglow. This process can last for seconds, minutes or even hours.
Sticking warning adhesive-tape/marking tape
The self-illuminating glow-in-the-dark phosphorising tape has optimum initial adhesion and excellent adhesive strength. It can be used indoors and outdoors. Do not touch the adhesive surface of the self-luminous safety tape with your fingers and ensure that the surface is dust-free when applying the tape. The optimum processing temperature for the phosporising tape is between +18°C and +22°C.
We always recommend a test application with each adhesive tape.
In order to assess the adhesive properties and removability of the self-luminous adhesive tape on your individual surface and under real climatic conditions, we recommend a test application. The warning tape should never be applied to sensitive surfaces such as natural stone or untreated wood.
The manufacturer's adhesion guarantee refers to the perfect condition of the adhesive tape itself. We pass on all product information to our customers to the best of our knowledge and belief. However, as individual working conditions (environmental influences, surfaces and processing) are beyond our control, we cannot accept any liability for any damage that may occur.
Buy duct tape glow – fast shipping guaranteed
You can purchase phosporising tape and many other adhesive tapes in our shop at reasonable prices, with fast shipping and personal advice at any time. We look forward to your call on: +49 89-122 89 06 22
Datenblatt GT Phos 
- Telephone support and counselling under:
- +49 89 - 122 89 06 22
- Mon - Fri 9 am - 5 pm
- Free Callback