inslulation tape black | 19 mm x 10 m | GT 807 | 10 pack insulating tape | matt, easy to remove from cables and technology | flame retardant, tear resistant, waterproof, elastic | dielectric strength 5 kV
Insulation tape GT 807 - 10-pack
Insulation tape GT 807 - 10-pack
GRIP inslulation tape GT 807 is an easily removable insulating tape and an absolute "must-have accessory" for every production! The PVC tape insulates reliably and, with its puncture resistance, offers electrical protection in a range of at least 5 kV. The inslulation tape is available in a practical pack of 10 with a length of 10 m / roll and a width of 19 mm.
The soft PVC foil has a matt surface and, together with the rubber-based adhesive, is 0.13 mm thick. The tape is very adaptable and elastic, and has medium adhesive strength (1.76 N/cm on steel). It is flame-retardant, tear-resistant, cold-resistant and waterproof when bonded. The inslulation tape is also resistant to oil, alkalis, moisture, acids and many other chemicals. All these properties make the inslulation tape an adhesive tape that is suitable for indoor and outdoor use. The PVC tape can be used, for example, to bundle cables, mark individual wires or quickly insulate cables.
You can buy Zumbel tape from allbuyone at a low price in grey, white and black. Alternative adhesive tapes as individual rolls or as a set can be found in our shop under the product group Insulating tape.
| Colour: | black |
|---|---|
| Type: | Electrical pvc tape |
| Dimensions: | 19 mm x 10 m |
Insulation tape – adhesive tape for cables and more
Buy inslulation tape not only to insulate cables – the GT 807 is an adhesive tape that can be used in many areas. At events, on construction sites, etc., the adhesive tape can be used to bundle cables, attach them to trusses, etc.
The adhesive tape is 19 mm wide and has a length of 10 metres. The PVC tape is flame retardant and waterproof, it provides electrical protection in the range of 5 kV (6500 V). Its excellent conformability makes it easier to carry out insulation work. The soft PVC foils are coated with a rubber adhesive and have a total thickness of 0.13 mm. The adhesive has an average adhesive strength of 1.76 N/cm on steel. The surface is matt and non-reflective.
The tape is cold-resistant, tear-resistant and waterproof and is also resistant to alkalis, oil, moisture, acids and many other chemicals. The elongation at break is 125%, which means that the adhesive tape can be stretched by a quarter of its length before it tears. The Zumbelband has a good unwindability and is, thanks to the small core diameter of 32 mm, very handy.
You can buy inslulation tape, in addition to a wide selection of many other adhesive tapes, at a reasonable price with fast delivery. You can find another insulating tape or cloth tape in our adhesive tape category.
GT 807 Tape – information and technical details about the item
The insulating tape is a soft PVC tape that is used for a variety of applications. The insulating tape has the following properties:
- Design: insulating tape, insulating tape
- Type: Insulating tape GT 807
- Brand: GRIP Eventbasics by allbuyone
- Substrate: Soft PVC foils
- Surface: matt
- Adhesive: rubber-based adhesive
- Adhesive performance: medium
- Adhesive strength on steel: 1.76 N/cm
- Adhesive strength on tape backing: 1.76 N/cm
- Tear resistance: high
- Breaking load: 19.6 N/cm
- Elongation at break: elastic, up to 125% elongation possible
- Water resistance: waterproof when applied
- resistant to alkalis, oil, acids and other chemicals
- Flammability: 15 seconds (according to EN 60454-2)
- Form adaptability: very good
- Hand cracks: can be cut with a cutter or scissors
- easily unrolled
- Can be used indoors and outdoors
- Dielectric strength: 5 kV
The PVC insulating tape is best stored at a room temperature of approx. +12°C to +25°C and should not be exposed to direct sunlight. A room humidity of around 65% is ideal.
GT 807 insulating tape – colour and dimensions
- Colours: grey, white and black
- Length: 10 m
- Width: 19 mm
- Thickness: 0.13 mm
- Core diameter: 32 mm
- Contents: pack of 10 rolls
GT 807: a practical accessory for lighting and sound engineers
inslulation tape is ideal for attaching cables and for other applications in lighting and sound engineering.The adhesive tape not only helps to bundle and attach cables to trusses, but also to ideally label power distributors.
It is often used in lighting and sound technology for microphones, plugs, power amplifiers or as a labelling tape for lamps.
To avoid damage, we recommend that you test the adhesive tape under the given circumstances with a sample adhesion to see if the adhesive tape can be removed without leaving any residue.
Alternative products from our range: self-amalgamating tape and much more.
In addition to the GT 807 insulating tape, you can also find other insulating tapes in different versions in our shop. Here is an excerpt from our range:
- Isoband AT 7 – high-quality adhesive tape in 19 mm x 20 m and many colours
- Insulating tape set – 10 colours in one set, 15 mm x 10 m per roll
- Kip 241 self-welding sealing tape – air- and watertight sealing with the 38 mm x 5 m roll
- Self-welding tape tesa 4600 – a very high-quality adhesive tape for insulating, repairing and sealing, measuring 25 mm x 3 m
our adhesive tapes section, you will also find gaffa tape, double-sided tape, cloth tape, adhesive textile tape and much more. It's worth taking a look – you can always use adhesive tape!
Buy inslulation tape – low price, fast delivery
Buy inslulation tape Youcan find artist tape, adhesive cloth tape, non-slip tape and many other adhesive tapes at allbuyone. Here you will find everything an adhesive tape heart desires – many different adhesive tapes in different colours, widths, at fair prices with fast delivery. We are also happy to advise you personally and answer any questions you may have at +49 89-122 89 06 22
