access ramp light | above | 40 x 10 x 2.2 cm | Accessories for heavy duty panels | Impact protection for barrier-free access / transition over floor protection panels Remopla

The access ramps light are the optimal solution for correctly closing the heavy duty panels light. The ramp protects the edges from damage and allows barrier-free access. They also help to avoid tripping hazards when there is public traffic. You can buy the access ramp in our shop in two versions, each designed to fit the end of the heavy duty panel. Choose the ramp from the two variants: "top" (groove ⊓) or "bottom" (joint ⊔). Each access ramp is flattened on one side and equipped with a groove-joint system on the other, just like the heavy duty panels themselves. This makes it easy to combine panels and ramps quickly and individually.

The access ramps are 40 cm long, 10 cm wide and 2.2 cm high, matching the dimensions of the heavy duty panel light. The ramps are very handy and weigh only 0.6 kg. The access ramps are also made of robust recycled plastic (PVC). This material is oil-resistant, acid-resistant, solvent-resistant and petrol-resistant. It is also normally flammable(fire protection class B2 certified), which can be an important point in terms of safety at public events.

Access ramp light for easy access to the heavy duty panel light.

Product characteristics of the access ramps light for the heavy duty panels light

How to use the access ramp light

There are many things to consider when using access ramps in conjunction with heavy duty panels. It is important that you have a flat surface as a base . This ensures that the elements are correctly connected to each other. In some cases, it is helpful and useful to place a separating layer between the ground and the heavy duty panel. Geotextile (155 g, grey) or PE foil 90 my are suitable for this purpose.

Before laying the heavy-duty panel Light, you should lay the "access ramp light bottom". You can then easily and conveniently place the heavy-duty panels on top of this. To achieve a better distribution of force, it is advisable to lay the panels in an offset pattern. The easiest way to create the interlocking pattern is to start every second row with the small heavy-duty panel. The surrounding ramps can also be mitred using a circular saw to ensure a perfect finish at the corners. Please note our listed points under "Tips & tricks for the correct handling of access ramps".

the ambient temperature, the properties of recycled plastic change. At very low temperatures, it can become harder and thus more prone to breakage. High temperatures, on the other hand, soften the PVC and expand it. You should not cramp the floor protection, because it needs space to expand when temperatures rise. This is how you avoid so-called"blow ups", which in the context of heavy duty panels stands for bulging.

Heavy duty panels protect the floor, but not the lawn.

Heavy duty panels protect floors from damage. However, when it comes to green spaces, it is important to consider the condition of the lawn and the climatic conditions. A damp lawn is not suitable as a base for heavy duty panels. The heavy duty panels can partially sink into the ground and thus become tilted. Consequently, the panels could separate from each other. Heavy duty panels are not lawn mats! The grass cannot "breathe" and is covered . Heavy duty panels should not be left on grass for long periods . We strongly advise against using them on expensive, heated football pitches. These should never be covered with heavy, non-breathable panels.

Heavy duty panels nevertheless have a protective function on green areas. Damage to the ground caused by heavy traffic on any lawn can be avoided. For this purpose, heavy duty panels can be laid on meadows, weather permitting. Please note that the heavy duty panel is not a lawn protection. The duration of the cover and the weather are important factors to consider before use. We cannot accept liability for any damage / crop damage that may occur.

Access ramps for heavy duty panels with an uncomplicated connection system

The floor protection is connected by tongue and groove (top ⊓ and bottom ⊔). This simple connection system enables quick assembly and disassembly and is not very prone to errors.

Other accessories for heavy duty panels.

heavy duty panels, like all our other products, at affordable prices and with fast shipping. We also try to offer the optimal accessories for all items. For the heavy duty panels, these are not only access ramps.

If you do not use access ramps, the height offset at the edge can be marked with our warning tape. You can protect sensitive floors such as tartan tracks with our PE foil 90 my, which you should use as a separating layer. On green areas, we recommend placing our geotextile (155 g, grey) underneath to prevent rubber residue or rubbish from remaining. It also prevents soil from being pressed into the cavities on the underside. Our easily recognisable warning tape can be used for demarcation or subdivision.

Tips & tricks for the correct use of access ramps

• Drilling for screw fastening is not a problem.
• Heat softens the ramps and expands them, which can lead to bulging.
• No emergency braking is allowed; always drive slowly on the plates
• Cold weather makes the PVC material harder and more sensitive
• Access ramps heavy can be worked on with a circular saw (wood saw blade)
• Do not turn around on the spot with vehicles, as this will cause the elements to shift.
• Cables should not be laid under the access ramps, as they could be crushed or cut
• With regard to use on green areas, we recommend reading the section "Heavy duty panels protect the ground, but not the lawn"

Buy heavy duty panels – top service, fast delivery and expert advice

You can order heavy duty panels, along with many other high-quality products, at a favourable price from the allbuyone shop – the shop for event supplies. If you have any questions about our items, we are always available to provide you with personal advice. We look forward to your call on +49 89-122 89 06 22