access ramp heavy | above | 400 mm x 100 mm | black | access ramp for Remopla heavy duty panels

The access ramps Heavy are the optimal solution for correctly finishing the corresponding heavy duty panels, protecting their edges from damage and ensuring barrier-free access to the panels. They also help to avoid tripping hazards when the public is present. You can buy the access ramp in our shop in two versions, each designed to fit the end of the heavy duty panel. Choose the ramp from the two variants: "top" (groove ⊓) or "bottom" (joint ⊔). Each access ramp is flattened on one side and on the other, like the heavy duty panels themselves, equipped with two groove and two joint sides. This makes it easy to combine panels and ramps quickly and individually.

The access ramps are 40 cm long, 10 cm wide and, at 4.3 cm, match the height of the heavy duty panel Heavy. The very handy elements are lightweight at just 1.2 kg. The access ramps are also made of robust recycled plastic (PVC). This material is oil-resistant, acid-resistant, solvent-resistant and petrol-resistant. The material is normally flammable (fire protection class B2) certified, which can be an important point in terms of safety at public events.

Barrier-free transition for heavy duty panels Heavy

Product properties of the access ramps heavy for heavy duty panels heavy

The access ramp Heavy in use

For proper installation, it is fundamentally important to have a level surface as a base . Only in this way can the elements be securely connected to each other. Before installing the access ramps and floor plates, you should check whether it may be helpful to place a PVC foil or fleece as a separating layer.

Always start the installation withthe "access ramp heavy bottom". You can then easily dock heavy duty panels with the groove side onto the laid out row. It is advisable to lay the access ramps offset to the heavy duty panels in order to achieve an even better interlocking and thus increased stability. If desired, the corners of the access ramps can be mitred.

Please note the points listed under "Tips and tricks for the correct handling of access ramps".

changes its properties depending on the ambient temperature. High temperatures make the PVC softer, very cold temperatures harder and thus more susceptible to breakage. You should not cramp the floor protection, because it needs space to expand when temperatures rise. This will help you to avoid so-called"blow ups", which in the context of heavy duty panels means bulging up.

Tips and tricks for the correct use of access ramps

We have put together a few tips to help you handle and use the access ramps correctly and, last but not least, to ensure a safe event. Please take the following points into account:

• Access ramps Heavy can be cut with a circular saw (wood saw blade)
• Drilling through the ramps for screw fastening is not a problem.
• Heat softens the ramps and expands them, which can lead to bulging.
• Cold makes the PVC material harder and more sensitive
• Cables should not be laid under the access ramps, as they could be crushed or cut
• Do not turn on the spot with vehicles, as this will cause the elements to shift.
• Emergency braking is not allowed, always drive slowly on the plates
• If you are considering using the panels on green spaces, we recommend reading the section 'Floor covering but not lawn protection'.

Access ramps for heavy duty panels with a simple connection system

The floor coverings are connected by means of a tongue-and-groove system. This connection system ensures quick and easy assembly and disassembly, and is also virtually error-proof.

Heavy duty panels protect the ground, but not the lawn

On the one hand, floor panels protect the lawn. This depends on the condition of the lawn and the climatic conditions. A damp lawn is not a suitable surface for heavy-duty panels, because the panels could partially sink into the meadow, get into an inclined position and separate the elements from each other. Heavy-duty panels are not lawn mats! The meadow will get no light and can hardly "breathe" under them . Therefore, heavy duty panels should not be left on meadows for long periods of time. An expensive, heated football pitch in a football stadium is an absolute no-go. This should never be covered with heavy-duty terrain panels!

On the other hand, without protection, heavy-duty traffic on any lawn is guaranteed to cause damage. Therefore, depending on the weather, heavy-duty panels can be laid on a meadow. Please just bear in mind that the heavy-duty panels are not lawn protection. The damper the weather and the longer the panels are in place, the worse it is for the condition of the lawn. We cannot accept liability for any damage that may occur.

Accessories: Heavy duty panel Heavy

Remopla heavy duty panels, and the matching accessories can be purchased from our allbuyone shop. With the access ramps for the heavy duty panel Heavy, we offer the option of a clean and barrier-free finish. If no access ramps are used, the height offset of the edge can be highlighted with a warning tape. To protect sensitive surfaces such as tartan tracks, we recommend using our PE foil 90 my as a separating layer. On surfaces such as meadows and lawns, our geotextile (155 g, grey) should be placed underneath to ensure that no rubber residue or other rubbish remains in the green area. It also prevents a lot of soil from being pressed into the chambers on the underside. We recommend using our warning tape for subdivisions or demarcations.

Buy heavy duty panels – low price, fast delivery

You can order heavy duty panels at a favourable price from our allbuyone shop – your shop for event supplies. If you have any questions, we are always available to provide you with personal advice. We look forward to your call on +49 89-122 89 06 22