boom flag with hemstitch | eyeleted | 120 x 300 cm | Premium quality printed advertising flags | robust, weather and UV resistant | other sizes and finishes available in the configurator | affordable flags with booms
Hoist flag 120x300 cm portrait format
Hoist flag 120x300 cm portrait format
Durable, weatherproof and individually printed in high-resolution, colour-brilliant print quality – with the boom flag you are purchasing a high-quality flag that will show off your advertising to its best advantage!
We manufacture the flag from 110 g/m² flag fabric, a durable yet lightweight material that is 30% wind-permeable and UV-stable and weatherproof for up to 2 years . The hoist flag is also flame-retardant and B1-certified (DIN 4102).
The boom flag is individually printed with your desired motif, single-sided in 6c digital print, in high-resolution, colour-intensive quality.
You can order the boom flag in size 120 x 300 cm in our shop in various designs – suitable for a flagpole with or without a boom, 6-8 m high. Each flag is reinforced with a trim band on the pole side and can be attached to the pole using eyelets or plastic snap hooks (every 100 cm). The top edge is available with a simple hem or a hemstitch (8 cm) – so that the flag will not droop even when there is no wind!
Tip: Play it safe and order the basic print data check directly with your order – for perfect printing results!
| Execution: | with hemstitch |
|---|---|
| Margin: | eyeleted |
| Dimensions: | 1,2 x 3 m |
Boom flag 120 x 300 cm – with and without hollow seam
Are you looking for a boom flag to present your advertising message at lofty heights? With the 120 x 300 cm flag, you have the right product for the job!
At 120 x 300 cm, the boom flag is a popular standard size that has proven its worth in many ways. To ensure that the flag is securely attached to the flagpole, you can choose between different versions: the side facing the flagpole with reinforcing trimming tape and eyelets or plastic snap hooks (every 100 cm). The top edge with a simple hem or with a hollow hem – suitable for a mast with a bracket, so that your flag will be perfectly shaped even when there is no wind.
The material – a light flag fabric at 110 g/m² – is weather-resistant and durable. We print the flags with your customised motif in our event print shop, with intense colours and perfect print-through (60%) – for maximum advertising impact on both sides!
Are 120 x 300 cm not big enough for you? Would you like custom-made advertising flags in your desired size? No problem! With our configurator, you can design flags from flag fabric yourself.
Our tip: Order the basic print file check at the same time! We will check your print files in advance and you are sure to receive your flag in the desired quality.
Flags in portrait format in different versions
You can order the hoist flag in the shop in various designs, as a boom flag or a simple hoist flag:
- top edge:
- with hollow seam (8 cm, flat)
- without hollow seam
- left side (mast side):
- reinforced with webbing and eyelets every 100 cm
- reinforced with webbing and plastic snap hooks every 100 cm
Delivering print data and the order process – it's that easy
We print the boom flag in our event print shop in colour-intensive quality, individually in your desired motif. And placing an order is so easy:
- Put the hoist flag in the shopping cart and complete the order.
- After a successful purchase, you will receive an order confirmation for your product and a link to our data sheet, which contains important information regarding the creation and transmission of print data.
- After that, you will receive a second e-mail with an order confirmation and a personalised link for uploading your print data.
- The order confirmation also contains the expected delivery time (approx. 5 to 6 working days).
-
Note on print data checking: If you have booked our basic print data check, we will automatically make minor corrections for you. If the resolution or similar is not correct, we will actively contact you.
If you have not booked the print data check, we cannot guarantee the quality of your printouts.
Optionally, you can book our personal premium graphics service. This will be charged separately based on time and effort (€44.50 for each half hour or part thereof). To do so, please leave us a short note in the order notes at the end of the order. - The hoist flag will be sent to you after production.
Exception: advance payment. In this case, we will not start production of your printed matter until we have received your payment. Accordingly, the delivery date depends on when we receive your payment
Please make sure that your print data is carefully created. Confirmed print orders are custom-made and cannot be returned.
If you have any questions, our team will be happy to advise you personally at +49 89-122 89 06 22 or [email protected]
Information about the product and material
Our hoist flags are made of flag fabric, a light and very durable material that is ideal for flags. Here is an overview of the properties:
- Type: flag fabric B1
- Material: polyester fabric (100% polyester)
- Surface weight (grammage): 110 g/m²
- Total weight: approx. 900 g
- Surface: silk matt
- Wind permeability: approx. 30%
- Light transmission: high
- Sound permeability: high
- Weather resistance: 0.5 - 2 years (depending on exposure)
- UV stability: 0.5 - 2 years (depending on exposure)
- Feel: textile-like, flexible and soft, flowing
- Durability: run-proof, durable (depending on the finishing and place of use)
- Washability: washable at 30°C (Caution: B1 protection is lost!)
- Print quality: high-resolution, very good quality, intense colours
- Printing technique: 6c digital printing, sublimation printing (thermal printing)
- Print: single-sided
- permeation approx. 60%
- Fire classification: B1 flame retardant according to DIN 4102
- Suitable for: flagpoles approx. 6-8 m with/without outriggers
Note: The information on weather and UV resistance was determined in studies under Central European conditions. Use in regions with different climatic conditions (high humidity, strong UV radiation), such as in southern European countries, tropical areas and desert regions, as well as in areas with heavy air pollution or at high altitudes, will cause a faster ageing process.
Size and packaging of the hoist flag
- Size: 120 x 300 cm
- Design: upper edge with or without hollow seam (8 cm, measured flat, for outrigger)
- Left side: with belt strap and eyelets/snap hooks every 100 cm
- remaining sides with double seam
For which flagpoles is the flag suitable?
- For flagpoles from 6-8 m: As a rule of thumb for portrait format flags, the flag should fill about half of the pole height. The 3 m high flag is therefore suitable for flagpoles from about 6 m to 8 m.
- For flagpoles with or without brackets: For a pole with a bracket, choose the flag with a hollow seam. The hollow seam measures 8 cm when laid flat, making it suitable for brackets up to a maximum diameter of 4 cm .
Do you have any questions? We'll be happy to advise you!
Our team will be happy to advise you in person!Do you have a question about hoist flags, the material or the manufacturing process? Are you unsure about how to create print data? We are always happy to answer any questions you may have about printing and anything else. You can contact us by email at [email protected] or by phone in Munich on +49 89-122 89 06 22
Hoist flag with high-resolution print
Textiles absorb the printing colours particularly well, which is why printing on fabrics generally results in very rich, brilliant colours. We print the flag fabric using high-resolution 6c digital printing (thermal sublimation printing). In this printing process, the ink is printed onto the fabric and then evaporated with heat, resulting in a particularly colour-intensive print image with perfect print-through.
Boom flags are printed on one side . The print motif is visible on both sides due to the 60% print-through, but it is mirror-inverted on the back and the colours are slightly less intense. Flag fabric is very translucent, so how much of the print motif can ultimately be seen through it depends on the lighting. The surface of the flag is silk-matt and non-reflective.
A tip regarding the print motif: vertical arrows as signposts make no sense on flags because the flag points in a different direction depending on the wind direction. Arrows pointing straight down, on the other hand, are useful.
A word about UV and weather resistance
The boom flag made of flag fabric impresses with its high-quality, hard-wearing material and high weather resistance. Many manufacturers give a general weather and UV stability guarantee of 3 years. This is true if the flag is used indoors.
However, most flags are used outdoors, at lofty heights, where they are exposed to sun, wind and weather over long periods of time. Three years is unrealistic here; weather and strong winds can cause material wear sooner or later. It is therefore difficult to provide a general specification for weather and UV stability. To be on the safe side, we therefore specify 0.5-2 years.
Note: To avoid material damage, we recommend that you take down the flag in strong winds.
Can the boom flag be washed? – Information on care and storage
The flag is easy to care for and can be washed at 30°C on a gentle cycle (with mild detergent). But be careful! Washing and ironing can, however, affect the flame retardancy. The boom flag can only be reclassified as B1 by professionally impregnating it with flame retardants.
To prevent the flag from getting wrinkles in storage, we recommend folding or rolling the fabric loosely. Also, make sure that the flag is completely dry to avoid mould growth.
Other flags – custom printed in different sizes and shapes
Our range includes other flagpoles, flags for hoardings and containers, and other advertising flags:
- hoist flag 150 x 400 portrait format
- Hoist flag 200 x 120 landscape format
- Construction fence flags individually printed or with standard motifs (emergency exit etc.)
- Container flags individual printed or with standard motifs (emergency exit etc.)
- Beachflags in different versions
Would you like a different format of boom flag, customised for you? With our configurator, you can configure your own flag fabric, in your desired size and with customised finishing.
Buy a boom flag – with fast delivery
We print the boom flag in our event print shop in high-resolution quality at a fair price. Our range includes other individually printable advertising flags as well as many other products such as advertising tarpaulins, stickers, banners and much more. Do you have questions about the article or have not found the desired product? Then give us a call! We will be happy to advise you personally. You can reach us in Munich on +49 89-122 89 06 22
Hissfahne 120 x 300 cm (mit Hohlsaum) - Druckdatenanlieferung 
Hissfahne 120 x 300 cm (mit Hohlsaum) Gestaltungsmaske.indd 
Hissfahne 120 x 300 cm (mit Hohlsaum) Gestaltungsmaske.ai