have beachflag printed | XL | Have beachflags printed | Beachflag Premium Curved 433 x 82.50 cm | Premium print quality | B1 flame retardant, UV-resistant and weatherproof | Banner flags for indoor and outdoor

The beachflag Premium Cur ved is a high-quality professional flag that offers many advantages. In contrast to the mast modules of the beach flag Basic, the 25 mm thick aluminium poles of the premium advertising sail are firmly connected to each other by a snap-in click system with ball locks . In addition, the poles are already bent into the shape of a flag. Thanks to the pre-bent premium aluminium poles, there is no tension on the flag fabric of the beach flag Premium Curved.

Have beachflags printed –: allbuyone offers first-class printing on high-quality material. The flag material (110 g/m² flag fabric) enables a colour-intensive and high-resolution print result for your advertising . Like all our beach flags, the Premium Curved has a hollow hem on one side. At the upper end of the flag, the end outlet for the mast tip is reinforced to counteract rapid wear. The other sides are hemmed – for an even flow in the wind.

In our shop, you can choose between three different sizes of the Premium Curved beachflag:

Beachflag made of flag fabric – material and properties

meets the fire safety regulations for public events due to its certified low flammability (B1 flame retardant according to DIN 4102) and can therefore also be used indoors.

Have individual beachflags printed – information about print quality

The desired motifs are transferred to the flag fabric using a high-resolution printing process (6c dye sublimation printing ). The ink is printed onto the fabric and then evaporated. The 110 g/m² flag fabric is ideal for printing because the polyester textile fabric absorbs colour very well, resulting in a first-class print with bright, intense colours and perfect through-printing (60 %).

The surface of the flag fabric is silk-matt and non-reflective. The material is not opaque, but allows light to pass through and has a print-through of 60%. This means that the printed motif is visible on both sides, but on the back it is slightly less intense in colour and mirror-inverted.

Please note when having beachflags printed: Our beachflags have no edging tape, so the entire surface (including the hollow seam) of the advertising sail can be printed. Nevertheless, you should make sure that important fonts and graphics are only placed in the safety area (see sketch). However, we advise you to apply the background colours up to the trim edge (end of motif + bleed). This will prevent annoying white edges later on when the flag is cut and tailored.

Please also note: the hollow seam and the hem slightly obscure the printed image. Therefore, you should not place any relevant graphic elements or fonts here either.

="green)" alt. material for the flags? It is possible to order the advertising sail flag in a different material (Airtricot, Lochfilet, Polymesh). Please contact us in person for more information.

Printing beachflag flags: order processing and creating print files

You can easily and conveniently have the Premium Beachflag printed at our printing company.

on the delivery of print data can be found in the data sheets section (link below the article images).

Setting up beach flags – assembly instructions

The Premium Curved beachflag is one of the high-quality and durable beachflags in our range. Setting up and taking down the beachflag takes just a few simple steps:

1. Lay the poles in the correct order on the ground (the bottom pole has the fastening system; the top pole has no ball locks).
2. Put the poles together: insert one end with ball locks into one end with the holes provided and click them together.
3. Use the hollow hem to pull the flag over the pole construction.
4. Use the fastening system to secure the flag to the pole and tighten.
5. Place the beachflag in a stand.

: Save time and hassle! Set up the beachflag before your event. Thanks to the ball lock system, the poles are firmly connected and do not fall apart. All you have to do is set up the flag.

Cross-shaped base, base plate, floor anchor & co. – accessories for the advertising flag

The delivery includes the flagpole and the individually printed flag.

Our range includes a selection of other useful products: for example, a matching bag for the Premium Curved beach flag, for easy transportation from A to B. We also offer a range of accessories to ensure that your beach flags stand securely. With the matching base, the advertising flags stand securely in wind and weather on many surfaces:

The cross-shaped base (or floor cross) ensures that the beach flag stands securely on uneven and even surfaces:

For an even more stable installation on flat surfaces, we recommend a base plate (metal plate foot) with rotator:

We recommend using a base plate as a stand for beachflags size M and larger in outdoor areas on even ground.

Are you planning an event on the beach or in the mountains? If you are using the beachflag on natural soft or firm ground (grass, sand, gravel, in the water), we recommend the insertion feet:

Depending on the location, gusts and high winds may occur (e.g. in the mountains, by the sea, etc.). In this case, it makes sense to additionally stabilise the beachflag using a hose weight. The rubber ring can be placed over a base plate or a cross base and holds up to 10 litres of liquid:

with being spoilt for choice? A little help: the larger and heavier the base, the more stable the stand!

Beachflag with rotator – a brief explanation

the accessory products have a rotator, including the floor dowels, the crossbase in size XL, the earth spike and all the base plates. The rotator makes it particularly easy to turn the beach flags on these fastening elements around their own axis; they are not rigid and offer incoming gusts of wind less resistance. The beachflags are not rigidly attached to the other fastening elements either and can also rotate.

More beach flags in our shop

In addition to the Premium Curved beachflag, you can find other beachflags in different shapes in our shop. You can choose between the following advertising sails:

• Beachflag Premium Square – the rectangular counterpart to the curved format, available in three sizes
• Beachflag Basic Standard – the classic, more affordable version, available in four sizes
• Beachflag Basic drop-shaped – the drop-shaped counterpart to the Basic Standard, available in four sizes

By the way: you can also reorder individual flags without poles for the premium beachflags. Please send us a request to [email protected] or call us on +49 89-122 89 06 22

Printed advertising flags – delivery and storage

The delivery of the Beachflag Premium Curved includes an individually printed flag and the matching frame. Depending on the size, the beachflag has a total weight of 0.8 kg - 1.2 kg.

Another advantage of the Premium Curved beachflag, in addition to its ease of use, is its flexible storage. The beachflag can be stored either in its assembled state or in individual parts. Thanks to the ball lock system, the beachbanner is stable in itself, even without a flag. If space is limited, the beachflag can of course also be stored in individual parts. Are you worried that parts will get lost? Simply order the matching transport bag for the Beachflag Premium Curved, so all the individual parts are safely together.

To prevent mould growth, make sure that the flag is stored in a dry state. The flag fabric is made of polyester and is very easy to care for. It can be washed in the washing machine at 30°C (fine detergent, gentle cycle) and ironed at low temperatures.

Please note: the Premium Curved beachflag is B1 flame retardant (according to DIN 4102). This property can be lost through washing and ironing. To maintain the B1 certification, the flag fabric must be re-treated with the appropriate flame retardants.

Beachflag in use

With an advertising area of up to 425 cm x 82.50 cm, the Premium Curved beachflag is the perfect signage and advertising tool, not only for events. It can be quickly set up in just a few simple steps and is immediately ready for use.

practical: the beachflag has a curved frame. Even without outriggers, the flag retains its shape thanks to the robust flagpole. This makes the flag easily recognisable even in calm conditions!

The high-quality beachflag can be used in many areas, such as:

• route marking at sporting events (running, cycling, beach volleyball)
• Signposting indoors and outdoors (e.g. info points)
• advertising medium at festivals, sporting events, trade fairs, etc.
• A pavement sign at trade fairs
• Advertising material in front of shops and restaurants
• Food/drink stand markings at festivals (e.g. categorised into vegetarian, vegan, etc. or the stand name)
• and much more.

Have beachflags printed in premium quality – high-quality printed advertising flags

No matter what the event (sports event, festival, trade fair, on the mountain, in the sea, etc.), with the Premium Curved beach flag you have an excellent advertising medium that is easy to use, quick to set up and has excellent print quality. In addition to these features, the premium advertising sail also impresses with its ball locks, which ensure a high level of stability and make set-up, storage and transport considerably easier.

You can buy the Premium Curved beachflag in three versions – to suit your individual wishes and requirements. In addition to beachflags, our range also includes many other printed products, such as roll-ups, displays, banners, stickers, deckchairs, hoist flags and cloth banners. We deliver beachflags within 6-7 working days (express delivery is also possible at an extra charge). Our prices are in EUR incl. VAT, plus shipping costs. Would you like a personal consultation or do you have any questions? Contact us at +49 89-122 89 06 22