Easy Dot | B1 | Bubble-free and removable film printing

Easy Dot: print stickers in matt and gloss

Bubble-free adhesion, repositionable, residue-free removal – Easy Dot impresses with the best features. The stickers are ready for use in no time and are ideal as temporary trade fair labelling, window stickers, simple branding of walls, furniture, counters, etc. The foils with a dot-shaped adhesive application are suitable for dry bonding on smooth, one-dimensionally curved surfaces such as glass surfaces and other smooth surfaces, and mainly for indoor applications.

In our shop, you can choose between the laminated Easy Dot foils in either matt or glossy ( ), cut straight or, on request, contour-cut in free form with customised printing.

Order Easy Dot foils in different designs

Easy Dot stickers are available in the following versions in the shop. The surface is laminated in each case, which makes the stickers particularly high-quality and stable:

Information on the ordering process, free data check of your print data included!

With our configurator, you can individually configure stickers and adhesive films made of Easy Dot in just a few steps. We then print the desired product according to your motif specifications in the desired format.

Do you have any questions or would you like a personal consultation?

Our team will be happy to advise you in person!

Easy Dot, adhesive film or window film? Not sure which adhesive film is right for your project? Or do you have a specific question about a material?
Or are you looking for a specific adhesive film that we do not (yet) have in our range?
No problem, we will be happy to advise you in person. Call us on +49 89-122 89 06 22 or write to us at [email protected]

Easy Dot adhesive film – key properties

The surface of Easy Dot: matt or glossy

The Easy Dot sticker film has a slightly dotted surface structure, which is the result of the stippled adhesive. During production, the surface is coated with a protective laminate, which can be either matt or glossy. The glossy version makes the print look particularly intense and brilliant. However, the glossy surface can cause reflections and glare.

The matt surface is reflection-free and ideal for use under spotlights, on stages, etc. However, the matt coating makes the colours slightly less intense.

Easy Dot delivers the highest print quality

We print Easy Dot stickers using a 6c digital printing process. The material offers very good print quality in photo-realistic resolution with brilliant colours.

We print Easy Dot in your desired size

We print the Easy Dot adhesive film in your desired size. From a minimum size of 10 cm x 10 cm up to stickers of several metres. The maximum size for a single-piece print is 500 cm x 133 cm; for larger formats, several Easy Dot foils can be easily joined together. We would be happy to advise you on this personally!

The configurator offers you two options for the shape: standard ( ) and standard . The standard option is a rectangular cut, which is of course free of charge and already included in the price. Contour cutting (free form) is also possible on request. With the free form, we can produce your stickers entirely according to your wishes, in round, heart or other shapes. There are no limits to your creativity here!

Material: Neschen Easy Dot adhesive film

Please note: Easy Dot adhesive film is UV-resistant for 2-3 years, but is only suitable for short-term outdoor use. Why? Easy Dot does not have an all-over adhesive coating, but rather an adhesive dot application. Moisture can collect between the individual adhesive dots. Therefore, we do not recommend prolonged outdoor use.

Easy Dot with dot-shaped adhesive application

What makes the Easy Dot film so special is that the adhesive – an environmentally friendly, water-based and solvent-free acrylate adhesive – is not applied over the entire surface, but in dots (dot adhesive). These adhesive dots make the sticker film particularly easy to apply and also easy to remove again.

You don't need to be a pro to apply Easy Dot stickers! Have you got bubbles in the foils or applied the sticker incorrectly? No problem! Thanks to the dot-like adhesive, the adhesive foil can be repositioned as required, and air bubbles can simply be smoothed outwards by hand or with a flat object (credit card or similar).

What is the Easy Dot adhesive film suitable for?

Easy Dot foils are intended mainly for indoor use. They are only suitable for outdoor use to a limited extent and then only for short periods.

Easy Dot stickers are ideal for:

• temporary POS/trade fair labelling
• for labelling back-lit acrylic panels (e.g. in exhibition stand construction)
• window stickers
• window stickers for promotions, special sales, etc.
• simple branding of walls, furniture, counters
• for short-term advertising campaigns
• Decorative film/branding on a wide range of smooth surfaces

Can it be removed without leaving any residue? Information on application and removal

The low initial adhesion and low final adhesive force make Easy Dot a popular material for stickers, even on sensitive surfaces. Easy Dot stickers adhere best to smooth, slightly curved surfaces.

Please observe the following instructions to avoid damaging the surface (e.g. reaction of solvents with the adhesive):

• Dry application, not suitable for wet application.
• Clean the surface before bonding
• The surface must be clean, dust-free and dry.
• Newly painted surfaces must be completely hardened and dried for at least 3 weeks
• Only apply to flat or one-dimensionally curved surfaces
• We advise against applying the film to sensitive surfaces
• Good removability (depending on installation, weather and duration of adhesion). Only possible on dust- and grease-free, smooth surfaces.
• Allow foils that are applied to heated surfaces (shop windows, metal sheets) to cool completely before removing them to avoid leaving adhesive residue.
• Any adhesive residue can be removed with methylated spirits (test on a small area first!)
• Storage tip: For protected storage, we recommend storing the film upright, if possible in the original packaging.

What other sticker foils are available from allbuyone?

In addition to the Easy Dot foil, you will find a selection of other stickers/foils in our shop, with both permanent and non-permanent adhesive, for a wide range of applications:

• inexpensive, monomeric adhesive film standard (non-permanent) for up to 3 years
• inexpensive, monomeric adhesive film, transparent (non-permanent), for up to 3 years
• polymeric premium adhesive film (permanent) for up to 7 years
• non-permanent / permanent floor stickers – with non-slip coating for floor advertising
• Magnetic film – ideal as a vehicle sticker
• Window film, transparent, non-permanent and with adhesive on the inside – for shop windows, etc.

Order printed Easy Dot

You can print high-quality Easy Dot stickers with allbuyone. We will make the stickers to the size you want, including free-form shapes. In our range, you will find a wide selection of other stickers that can be printed customised, as well as many other products (advertising banners, mesh banners, sign printing, etc.). Do you have questions about your order? We will be happy to advise you personally at +49 89-122 89 06 22