Barrier tape holders | white | length 106 cm | barrier tape holder with spiral-shaped safety clamp | made of solid spring steel with a white plastic coating | 350 g per piece

The Grip barrier tape holder makes it easy to cordon off and mark different areas. The flexible, white barrier holder is 106 cm long and has a spring steel rod for securing it to the ground. The diameter of the spring steel is approx. 12 mm, giving the barrier tape holder a weight of approx. 345 g. This makes the barrier rod about half as heavy as conventional barrier tape holders made of structural steel. At the lower end of the rod there is an additional, right-angled steel. A cross strut,, ensures stability and helps to press the rod easily into the ground with your foot. No tools necessary! At the top of the barrier tape holder is a plastic-coated, spiral-shaped eyelet with no sharp corners or edges.

Of course, you can also purchase a concrete steel barrier tape pole from our range.

Note: Please note that the spring steel barrier tape holder is suitable for loose ground, such as grass, snow and soil.

Order the barrier tape holder made ofspring steel from the allbuyone shop at . Compared to rigid concrete steel, this quality is flexible and springs back under load. This makes it particularly easy and time-saving to set up barriers and markings without tools .

Difference between Grip barrier tape holders and conventional barrier tape holders

The upper end of the barrier rod is a plastic-coated, spiral-shaped safety bracket that prevents the barrier tape from slipping out. Even when subjected to pressure from people or strong winds, this eyelet holds the barrier tape securely in place. The smooth plastic coating is gentle on materials and allows cables to be laid over it.

The barrier tape holder is divided at the bottom into two rods that are connected to each other by a cross strut attached at a right angle. This cross strut allows the user to easily press the barrier tape holder into the ground with their foot. With a suitable surface, it is therefore possible to set up a barrier or marking without any additional tools.

The barrier tape holder should be inserted into the ground with the foot on the cross brace as intended. Heavy loads acting on the spring steel from above (e.g. hammering) can cause the rod to bend and damage the plastic coating .

Barrier tape holder Grip: Product information

Use of the Grip barrier tape holder

The barrier tape holder can be used to cordon off danger areas or prohibited zones that must not be entered for safety reasons . These barrier rods are also ideal for marking and signposting parking spaces, access routes or loading zones.

Very easy to use – no tools or gloves required

Thanks to the easy foot fixing, long distances can be marked out by just one person. To fence off or mark out a festival site, all you need is the appropriate number of barrier holders, a healthy foot and no other hand tools!

Spiral barrier tape holder: convenient use with barrier tape

The spiral-shaped eyelet allows barrier tape, cable or similar items to be inserted rather than threaded through . This has the advantage that the barrier tapes are not cut and can therefore be reused. For cable routing, this means that any cable with a diameter of up to 10 mm can be used for above-ground installation, regardless of the plug size.

Difference between spring steel and concrete steel (ribbed steel)

The Grip barrier tape holder is made of spring steel. In terms of elasticity, this steel differs from conventional Neptune hooks made of concrete steel (ribbed/twisted structural steel), which are difficult to deform with a hammer.

spring steel barrier holders can be flexibly bent by hand , and the rod springs back. Once the barrier post has been bent, it can be bent back to its original shape without any problems.

Alternative product: barrier rod made of reinforced concrete

Of course, you can also purchase concrete steel barrier tape holders from our range. As exclusive barrier systems, we offer a large selection of barrier posts with webbing in various colours and made of stainless steel.

Accessories: Large selection of barrier tapes

• Barrier tape red/white, extremely tear-resistant, 500 m, 100 m, 50 m
• Barrier tape black/yellow, 500 m
• Barrier tape red/white, 500 m, LDPE
• Striped barrier tapes in 4 different colours
• Plain barrier tapes in 8 different colours

Further offers from this category:

Adhesive tapes are also suitable for marking and cordoning off areas at events. You can order the following products for this purpose:

• Warning tape red/white and black/white, PVC adhesive tape
• Warning tape red/white and black/white, cloth tape
• Anti-slip tape, yellow/black and phosphorescent
• Tunnel tape yellow/black
• as well as a large selection of various fluorescent neon adhesive tapes

Buy barrier tape holders

You can buy barrier tape holders at low prices in the allbuyone shop with immediate dispatch, quickly delivered within 24 hours on working days. Do you have any questions about our products? For personal advice, please contact us at [email protected] or +49 89-122 89 06 22