Buy PVC non-slip » PVC floor R 10

Volume	Price
from 4 Rolls	774,98 €^12,92 €/1m²
from 10 Rolls	716,36 €^11,94 €/1m²
from 20 Rolls	674,02 €^11,23 €/1m²

Colour:	grey
Dimensions:	30 m x 2 m
Slip Resistance:	R10 in accordance to GUV-R 181

PVC Unigrip – non-slip floor covering R10

The PVC floor Unigrip is a non-slip floor covering for events, it is classified as R10 according to BGR 181. In order to meet the requirements for non-slip floor coverings, the PVC floor has a structured, PU-coated surface. Classified according to Bfl-s1 (13501-1), the PVC floor covering also meets the fire protection requirements for public events. You can buy the high-quality PVC slip-resistant in 10 colours, on a roll, 30 metres long.

Properties of the PVC floor Unigrip

The non-slip floor covering has the following properties:

Material: PVC
PU-coated, structured surface
Total thickness: 2.0 mm
Wear layer: 0.2 mm
Fire behaviour: Bfl-s1 (13501-1)
Slip resistance: R10
Width: 2 m
Length: 30 m
Weight: 1250 g/m²
Colour: black, white, anthracite, grey, light grey, red, orange, yellow, aniseed, blue

: The PVC floor is a high-quality, temporary floor covering for events. The PVC floor is not designed for permanent installation or long-term use.

What does surface treatment mean?

The PVC floor covering is characterised by its structured, PU-coated surface, which makes it slip-resistant to R10. But what does PU-coated actually mean?

During surface treatment, surfaces are coated or impregnated. Allbuyone's PVC Unigrip is given a polyurethane coating during production. This results in the following advantages:

dirt-resistant
wear-resistant
scratch-resistant
Resistance to chemicals
easier to clean

Certified anti-slip properties in accordance with R 10

The German Workplace Ordinance stipulates that floor coverings must be slip-resistant. The BG rule BGR 181 specifies the area of application for slip-resistant floors. The BG rule is binding for all public institutions and businesses. If it is not complied with, insurance cover will not apply in the event of an accident.

The procedure for testing the slip resistance of floors is regulated in DIN 51130, with floors being categorised into the rating groups R9 to R13. R9 floors have the lowest slip resistance, while R13 floors have the highest.

Allbuyone's PVC floor covering is classified as R10, which stands for an increased static friction value, the floor covering is slip-resistant up to an angle of inclination of 10° to 19°.

Where do non-slip floor coverings have to be used?

The scope of application of BG rule BGR 181 includes rooms and work areas where slippery substances can get onto the floor and increase the risk of slipping. Slippery substances include: grease, oil, water, food or food residues.

In the event industry, these rooms include:

temporary kitchens and catering areas
bar areas
toilet facilities
outdoor sales areas
indoor and outdoor entrance areas
cellars and terraces
Outside stairs

objects or particularly hard materials that exert a high point load can damage the PVC surface. The PVC floor can also become slippery when wet.

Cleaning PVC flooring

Dust can be removed by damp mopping. For more stubborn stains, we recommend a special cleaner for PVC floor coverings.

: A large proportion of dirt can be caught in the entrance area by clean-running mats before entering the floors.

Please note that the photographic and schematic representation of colours may vary depending on the monitor settings. Therefore, our sample images and colour tiles are not colour-binding and may turn out lighter or darker in reality. If you are looking for a precisely defined colour value, please request the corresponding material samples.

Buy PVC non-slip – with guaranteed fast delivery

You can order the PVC non-slip floor at an affordable price from allbuyone. In our shop, you will find the right accessories for laying the floor, including double-sided tape and cloth tape in different colours. Do you have any questions? We will also be happy to advise you in person on +49 89-122 89 06 22