Wide: | 38 mm |
---|---|
Colour: | white |
Dimensions: | 38 mm x 25 m |
The GT 703 double-sided adhesive tape is a very strong and weakly adhesive tape. The double-sided tape from our GRIP Eventbasics brand impresses with its good quality and affordable price.
double-sided adhesive tape offers a conformable carrier – a fine-mesh, robust plastic fabric – which enables double-sided bonding with different adhesive strengths.
The side covered with yellow siliconised paper is very strong (adhesive strength on steel 7 N/cm) and is designed for laying floor coverings with difficult-to-bond backs and for fastening and mounting. The open side, i.e. the side that is stuck to the substrate, has a weaker adhesive strength (adhesive strength on steel 3.1 N/cm). This adhesive has good re-adhesion properties, holds securely and can be removed from many materials with virtually no residue (approx. 4-5 days with low residue, depending on the substrate).
You can buy the double-sided adhesive tape here in our shop as a roll with a length of 25 m and a choice of widths of 19 mm, 38 mm or 50 mm. You can order further double-sided adhesive tapes from our range. As an alternative product, we recommend the residue-free removable double-sided tape GT 702 or the double-sided tape extra strong GT 705. We keep all double-sided adhesive tapes in stock with short delivery times, shipping on working days within 24 hours.
Wide: | 38 mm |
---|---|
Colour: | white |
Dimensions: | 38 mm x 25 m |
The GT 703 double-sided tape from our GRIP Eventbasics brand is a versatile and universally applicable adhesive tape that is often used by our customers for temporarily laying floor coverings (carpet, PVC, etc.), for gluing skirting boards and for attaching decorations. In widths of 19 mm and 38 mm, the tape is ideal as a residue-free removable tape for laying carpets and for light decoration, and in a width of 50 mm, the tape is also suitable for stage coverings and heavier vertical installations.
The double-sided tape has two sides with different adhesive strengths (very strong and weaker) and is coated on both sides with synthetic rubber adhesive. The clearly differentiated adhesive properties, which are created by a plastic fabric carrier, guarantee safe laying and largely good repositionability.
The open side of the double-sided tape, which adheres less strongly to the floor, can be stuck to almost any non-sensitive surface. Thanks to the fabric adhesive carrier, the tape is extremely adaptable and enables a good bond on rough, structured and shaped surfaces. The side covered by a siliconised paper offers very strong adhesion and enables, for example, the bonding of difficult-to-bond carpet backs, carpet tiles and other floor coverings as well as the attachment of other materials.
The double-sided tape GT 703 is suitable for indoor use and can also be used for a short time outdoors at trade fairs and events.
color="green"Please note: Due to possible colour changes, the double-sided adhesive tape GT 703 should not be used on high-quality floors, such as natural stone, marble, parquet and untreated wooden floorboards.
The double-sided adhesive tape has two sides with different adhesive strengths, which are clearly separated by the carrier:
icontype="icon--info" size="large"color="green"Tip: A double-sided tape with a fabric carrier anchors particularly well on uneven and porous surfaces. Did you know? You can also buy this double-sided tape in our shop as a double-sided tape (GT 704) with a thinner foil as a carrier and a slightly higher adhesive strength (on the closed side). This product is easier to remove after application due to the lower adhesive application and the advantages of a film carrier. If you work slowly, foils can often even be removed in one piece. Alternatively, we offer you GT 702 – a double-sided tape that can be removed without leaving any residue.
: This double-sided tape is not suitable for gluing to sensitive surfaces such as natural stone, parquet flooring, wooden floorboards, marble, etc. The double-sided adhesive tape could leave discolouration on these surfaces.
The double-sided tape is suitable for a variety of surfaces, and is particularly good at holding, fixing and mounting difficult, porous and structured surfaces. This is due to the carrier. A fabric per se anchors itself better to the substrate than a double-sided tape with a film carrier.
If you are using the double-sided tape as an adhesive tape for PVC flooring or carpet, we recommend working in stages. Please do not touch the adhesive surfaces on either side with your hands and only ever pull as much adhesive tape off the roll as you need. After installation, press the tape on firmly. The higher the contact pressure, the faster and firmer the tape will stick. This is particularly important to remember when using the adhesive tape as an assembly tape! The recommended processing temperature for the double-sided tape GT 703 is between +5°C and +30°C. If you are using the adhesive tape as a repair tape, please make sure that the surface is free of dust and grease.
But be careful: once applied, the double-sided tape cannot generally be removed from all surfaces without leaving a residue!
We would like to expressly point out that the adhesive performance and removability of any double-sided tape can vary greatly. These properties are directly dependent on:
Please note: Colours may change on epoxy resin-coated floors, varnished parquet floors, marble, untreated wood or natural stone floors.
generally recommend that you carry out a test application in advance, on the original surface, under real climatic conditions. We cannot assume any guarantee or liability for residue-free removability or for any damage caused by adhesive tape.
The manufacturer's liability refers to the perfect condition of the adhesive tape as such. We pass on all information about the product to our customers to the best of our knowledge and belief. However, since individual working conditions (environmental influences, surfaces and processing) are beyond our control, we cannot accept any liability or guarantee for any damage that may occur.
Store the double-sided tape in its original packaging until use. The tape should be stored at approx. 20°C and a relative humidity of no more than 65% for a maximum of one year. Protect your stock from moisture and direct sunlight.
You can order the following double-sided tapes for fixing, mounting and laying from our standard range:
Are you looking for a different double-sided tape, or a different length or width, or would you prefer different colours? Please contact us and we will be happy to advise you personally. We supply many other double-sided tapes on request – so we are sure to have the right product for you!
You can order double-sided adhesive tape at a low price from the allbuyone shop. Our range includes many other adhesive tapes as well as other accessories for events. We will ship double-sided tape within 24 hours on working days. Our prices are in EUR incl. VAT, plus shipping costs. Do you have questions about our adhesive tapes or about your order? Call us, we will be happy to advise you personally on: +49 89-122 89 06 22