Buy polyethylene nets customised

Mesh 202 B1

€14.48^*

/m²

Volume	Price
from 20 m²	11,22 €^*
from 100 m²	10,15 €^*

*incl. VAT plus

Article number: 2513061·Weight: 0.14 kg/m²

Colour:	black
Quality:	flame retardant acc. to DIN 4102-B1 UV-stable for 1-2 years
Material:	HDPE
Material Weight:	140 g/m²
Wind-Permeability:	37 %
Information:	dimensional tolerances of +/- 5% due to technical reasons and depend on temperature and humidity

Please choose Colour

polyethylene net customised

Type 202 mesh is a mesh fabric with 37% wind permeability and a coarse-meshed, open structure. With an opacity of approx. 65%, 202 mesh has an average level of privacy protection. To meet the strict safety requirements in the event sector, the mesh is flame retardant and certified B1 according to DIN 4102. The plastic mesh weighs 140 g/m² and is available in black and white.

PE mesh – properties

The PE mesh is a mesh made of HDPE (high-density polyethylene) with the following properties:

B1 flame retardant according to DIN 4102
weather resistant
rot-resistant
extremely tear-resistant and dimensionally stable
UV-stabilised (approx. 1-2 years)
water-repellent
resistant to alcohol, oil, alkalis, acids and petrol
Temperature resistance: approx. -30°C to +90°C
Heat distortion temperature: approx. 100 °C
Wind permeability approx. 37%
Weight: 140 g/m²

Mesh 202 – flame-retardant mesh

The plastic mesh is B1-certified according to DIN 4102. This is crucial for use at public events, where strict fire protection regulations apply.

can also be used as a shading net and sun protection with a shading value of approx. 67%.

Configure your plastic mesh made of mesh 202 yourself

In the configurator, you can put together the plastic mesh yourself in just three steps.

First, enter the desired dimensions.
Then you can choose the finish of the four side edges. The following finishes are available:

with eyelets, every 50 cm
hollow seam laid flat 5 cm
hemmed
cut straight, without hem

Please note:

dimensional tolerances of +/- 5% are due to technical reasons and depend on temperature and humidity.
Due to the partially automated manufacturing process, the eyelets on opposite edges are usually not arranged symmetrically. If you require a symmetrical or individual arrangement of the eyelets, we can implement this for an extra charge. Please send us a separate request and a corresponding sketch.