polyethylene net customised white | Mesh 201 | B1 | sew & assemble
Mesh 201 is a very coarse-meshed polyethylene net with 50% wind permeability. Mesh 201 is B1 flame retardant according to DIN 4102 and is available in black and white. Select the dimensions and finishing and design your own customised mesh!
| Colour: | white |
|---|---|
| Quality: | flame retardant acc. to DIN 4102-B1, UV-stable for 1-2 years |
| Material: | HDPE |
1 First configure your desired individual pieces:
2Complete your configuration. We will determine the best price for you:
polyethylene net customised
The plastic mesh 201 is a coarse-meshed and wind-permeable. Mesh 201 is suitable for wind and view protection nets, fence panels and much more.
Mesh 201 – an overview of its properties
- Very coarse mesh
- flame retardant B1 according to DIN 4102
- dimensionally stable
- rot-resistant
- UV-stable for approx. 1-2 years
- water-repellent
- resistant to alcohol, oil, alkalis, acids and petrol
- Temperature resistance: approx. -30 °C to +90 °C
- Heat distortion temperature: approx. 100 °C
- Wind permeability approx. 50%
- Weight: 125 g/m²
Mesh 201 - flame-retardant plastic mesh
The plastic mesh is B1-certified according to DIN 4102. This is crucial for use at public events, where strict fire protection regulations apply.
Configure your own plastic mesh made of mesh 201
Use the configurator to put together your own polyethylene net customised to your requirements.
- First, enter the desired dimensions.
- Then you can choose the finish of the four side edges. The following finishes are available:
- with eyelets, every 50 cm
- hollow seam laid flat 5 cm
- hemmed
- cut straight, without hem
Please note:
- dimensional tolerances of +/- 5% are due to technical reasons and depend on temperature and humidity.
- Due to the partially automated manufacturing process, the eyelets on opposite edges are usually not arranged symmetrically. If you require a symmetrical or individual arrangement of the eyelets, we can implement this for an extra charge. Please send us a separate request and a corresponding sketch.
Buy plastic mesh made of polyethylene
Create your own HDPE plastic mesh in just a few steps! For unusual special sizes and custom-made products, we will be happy to advise you in person at +49 89-122 89 06 22