belt mount wall bracket | Belt mount for barrier stands GRIP
Wall bracket for barrier stands GRIP
Wall bracket for barrier stands GRIP
| Colour: | black |
|---|---|
| Material: | plastic |
| Dimensions: | 9,7 cm x 1,7 cm x 0,9 cm (HxWxD) |
| Description: | wall bracket for the belt support of GRIP Barrier Stanchions, including screws and dowels |
This bracket is used to attach the belt to the wall. It is a practical accessory for our GRIP barrier stands. The belt mount is often used when a second belt-holding barrier stand cannot or should not be used due to space constraints. The wall bracket for belts can be fixed to any other surface, provided that there is a means of attaching screws.
The wall bracket is made of black plastic and measures 9.7 x 1.7 x 0.9 cm (height, width, depth). The scope of delivery includes 1 belt wall bracket, 6 screws and 6 dowels.
Belt mount wall bracket for GRIP barrier stands
The belt mount for the wall serves as an accessory for our GRIP barrier stands. The purpose of such a wall bracket is to hold the belt of a barrier stand in order to optimally close off the barrier area on a wall, column or even a fence .
The belt holder is made of plastic and is available in black. The wall shoe plug, measuring 9.7 x 1.7 x 0.9 cm (height x width x depth), is supplied with 6 dowels (2.5 cm) and 6 matching Phillips screws (2.5 cm).
The belt fastening for the wall is often used in safety areas where it is not possible to set up a barrier stand or where an additional barrier stand could pose a hazard.
Details of the belt mount wall bracket
- Material: plastic
- Colour: black
- Dimensions: 9.7 cm x 1.7 cm x 0.9 cm (H x W x D)
- Scope of delivery: 1 belt wall bracket, 6 screws and 6 matching wall plugs
Please note that this wall mount is only designed for our GRIP barrier stands. We cannot guarantee that the belt mount is compatible with barrier stands from other manufacturers.
Attaching the belt wall mount
The belt holder can be attached to almost any smooth surface. In addition to the 6 screws, 6 wall plugs are included in the delivery for attachment to solid surfaces.
The mounting height of the belt holder should correspond to the height of the barrier stand, but can of course be varied as desired.
With careful handling, the belt wall holder can be used for many other applications.
Tips, tricks and hints for attaching the belt wall holder
- The object to which the bracket is attached should be able to withstand the pull of the strap.
- Wind acting on the strap increases the tensile force on the wall bracket.
- When attaching to wood, pre-drilling prevents the screws from splitting the wood.
- Cable ties can be used for attachment to a construction fence.
- The screws should not be tightened too much, as this can damage the wall mount.
The wall bracket cannot be replaced as a spare part for mounting on a barrier stand.
Buy belt mount wall bracket in the allbuyone shop
You can order the belt mount wall bracket from GRIP at a low price and with fast shipping in our shop. If you have any questions, we are available at any time for personal advice. We look forward to your call at +49 89-122 89 06 22.
31/08/2026 by Björn B.
28/05/2025 by Frank H.
15/05/2025 by Ingo W.
