wall bracket for barrier cord | 34 x 34 x 25 mm | die-cast metal, silver | wall mount for carabiner incl. screws and wall plugs | eyelet Ø 12 mm
Wall bracket for barrier stand with cord
Wall bracket for barrier stand with cord
| Colour: | silver |
|---|---|
| Dimensions: | 34 x 34 x 25 mm |
| Design/ Version: | die-cast |
| Description: | Wall bracket for cord with carabiner |
With the cord holder, you can attach the cord of the barrier stand directly to the wall. The wall bracket is a practical accessory that is often used in security areas. It is used when a second barrier stand with cord cannot or should not be used due to space restrictions. The inconspicuous wall mount can be fixed to smooth surfaces. The only requirement is a mounting option for two screws.
The wall bracket is made of die-cast metal andmeasures 3.3 x 3.3 x 2.7 cm (width x depth x height). We ship the wall bracket for barrier cord with matching screws and dowels.
| Colour: | silver |
|---|---|
| Dimensions: | 34 x 34 x 25 mm |
| Design/ Version: | die-cast |
| Description: | Wall bracket for cord with carabiner |
Wall bracket for GRIP barrier stand with cord
The cord holder for the wall is a practical accessory for our GRIP barrier stands. This wall bracket allows you to attach a cord to the barrier stands . This is particularly useful for optimally closing off the barrier area on a wall, column or even a fence . The cord fastening for the wall is often used in areas where it is not possible to set up a barrier stand or where an additional barrier stand could pose a danger to visitors.
The wall bracket for cord is made of metal and has been die-cast. The wall bracket measures 3.3 x 3.3 x 2.7 cm (width x depth x height). The diameter of the holder is approx. 1.2 cm. Two dowels (2.5 cm) and two matching Phillips screws (2.0 cm) are included as accessories.
Information about the wall bracket for barrier cord
- Material: metal (die-cast)
- Colour: silver
- Dimensions: 34 mm x 34 mm x 25 mm (W x D x H)
- Holder: Ø 12 mm
- Scope of delivery: 1 cord wall mount, 2 screws and 2 matching dowels
Please note that the cord wall holder is only designed for GRIP brand barrier stands with cord. Unfortunately, we cannot guarantee that the belt holder is compatible with barrier stands with cord from other manufacturers.
Attaching the wall bracket for cord
The wall bracket for cord is best attached to a smooth surface. If this is a solid wall, you should also have a suitable drill bit in addition to the accessories.
It is best to attach the cord holder at the same height as the cord stand. Of course, you are free to choose the height.
With careful handling, the strap wall holder can be used for many other applications.
We would like to point out that this wall bracket is only designed for our GRIP brand barrier stands. We cannot guarantee that the belt mount is compatible with demarcation stands from other manufacturers.
Instructions for attaching the wall bracket for barrier cord
- The wall bracket should be attached so that the pull of the cord can be absorbed.
- When pre-drilling holes in wood, avoid splitting the wood with the screws.
- Cable ties are used to attach the cord to other objects such as fences.
- The screws should not be tightened too much, as this can damage the wall mount.
Buy wall bracket for barrier cord
The wall bracket for barrier cords is available in our shop with fast shipping, directly from stock. If you have any questions, we are also available to assist you personally. We look forward to your call at allbuyone on +49 89-122 89 06 22.
- Telephone support and counselling under:
- +49 89 - 122 89 06 22
- Mon - Fri 9 am - 5 pm
- Free Callback