polyethylene net configured | white | Gaze 100 | B1 | made to measure
Mesh 100 B1
Mesh 100 B1
| Colour: | white |
|---|---|
| Quality: | flame retardant acc. to DIN 4102-B1 UV-stable for 1-2 years |
| Material: | HDPE |
| Material Weight: | 250 g/m² |
| Wind-Permeability: | 16 % |
| Information: | dimensional tolerances of +/- 5% due to technical reasons and depend on temperature and humidity |
Gaze 100 is a very fine-mesh fabric made of HDPE. The plastic mesh is 16% wind-permeable and has a high opacity. Gaze 100 is robust and weather-resistant and, thanks to its close-mesh structure, ideal as a wind and view protection net.
polyethylene net configured
The plastic mesh made of gauze type 100 is particularly fine-meshed and dense. The mesh is B1 flame retardant according to DIN 4102, weather resistant and dimensionally stable. With its fine-meshed fabric, gauze 100 is ideally suited as a dense view protection net.
Mesh 100 – properties:
- very fine mesh
- flame retardant B1 according to DIN 4102
- almost opaque
- retains its shape
- rot-resistant
- UV-resistant for approx. 1-2 years
- water-repellent
- resistant to alcohol, oil, alkalis, acids and petrol
- Temperature resistance: approx. -30 °C to +90 °C
- Heat deflection temperature: approx. 100 °C
- Wind permeability approx. 16%
- Weight: 250 g/m²
- Available in: black, white
Gaze 100 – view protection net B1 flame retardant
The plastic mesh made of mesh is B1-certified according to DIN 4102. This is important for use at public events, where strict fire protection regulations usually apply.
Configure your own customised wind and view protection net
With the mesh configurator, you can create your own polyethylene net customised to your needs – in just three steps!
- First, enter the desired length and width.
- Then you can choose the finish for the four sides. The following finishes are available:
- with eyelets every 50 cm
- hollow seam laid flat 5 cm
- hemmed
- cut straight, without hem
Please note:
- dimensional tolerances of +/- 5% are due to technical reasons and depend on temperature and humidity.
- Due to the partially automated manufacturing process, the eyelets on opposite edges are usually not arranged symmetrically. If you require a symmetrical or customised arrangement of the eyelets, we can implement this for an extra charge. Please send us a separate request and a corresponding sketch.
Buy polyethylene nets configured to your needs – low-priced from allbuyone
Create your own personal wind and view protection net quickly and easily with the mesh configurator. Do you have any questions? Do you need an unusual custom-made product or special sizes? We will also be happy to advise you personally at +49 89-122 89 06 22
