cable protector black line | Cableguard | 5 channels, each 3.2 x 3.4 cm | 44.5 x 91 cm | red, black | high-quality cable overrun protection | heavy duty up to 4.7 t per axle | hinged lid | robust, durable, suitable for wheelchairs

The Black Line cable protector is a high-quality cable protector that can be laid quickly and easily thanks to its low weight of only 10 kg. The overrun protection for cables is laid on construction sites and at events where cables need to be routed across traffic routes and protected from people. Cable protectors protect exposed cables from being pulled, crushed, abraded or otherwise damaged by heavy traffic and protect people from electrostatic charges.

The cable protector Black Line is a red and black floor-mounted channel designed for professional use and can be loaded with up to 4.7 tonnes per axle (axle load). The cable duct is 44.5 cm wide and 91 cm long. With 5 cable trays measuring 3.2 x 3.4 cm, the cable bridge helps to keep cables tidy.

The Black Line cable protector has particularly durable connecting elements that do not slip, even on heavily frequented paths. Another advantage for frequent assembly and disassembly of cable protectors is that the cover is firmly connected to the cable protector by means of a hinge. This prevents components from being lost during transport.

The cable protection bridge made of halogen-free polyurethane is resistant to oil, acid and petrol. It is characterised by a dielectric strength of 110 kV and provides a non-conductive barrier between people and cables. The overrun protection has a non-slip surface in accordance with DIN 51230. This means that the cable bridges are slip-resistant even when wet.

Black Line cable protectors are fully compatible with the Yellow Jacket cable protector Bumble Bee.

Dimensions of the Black Line cable protector

• Height: 50 mm
• Width: 445 mm
• Length: 910 mm
• Width (channels): 34 mm
• Height (channels): 32 mm
• Pitch: 23°

Features of the cable protector Black Line

Cable protector Black Line – high-quality material and certifications

The Black Line BL5-28 cable protector is oil, acid and petrol resistant ( ) and complies with CE standards. With a dielectric strength of up to 110 kV, the Black Line cable protector is non-conductive in accordance with standards 2006/95/EC73/23/EEC and IEC 60529. All cable protectors comply with building material class B2 in accordance with DIN 4102.

Thanks to their high-quality material, halogen-free polyurethane, and clean workmanship, Black Line cable protectors are virtually maintenance-free. The Black Line cable protector complies with ISO 62 / ASTM D570 standards. This means that the overrun protection has absorbed less than one percent water after 24 hours in a water basin. This prevents moisture-related deformation (swelling, etc.) of the connecting parts and guarantees long-term precision fit of the cable protectors.

Marking of cable protectors

You have the option of customising the cable protector with lettering or your company logo! The overrun protection can be provided with any motif and font with a letter height of 5 mm or more. For an optimal typeface, we recommend a letter size of at least 10 mm. There is an additional charge of €60 per engraving plate for personalising the Black Line cable protector. For orders of 30 or more, the cable protector can be customised free of charge.

On request, the underside of the Black Line security cable protectors can be fitted with a metal plate . Lettering such as serial numbers can be engraved on this plate.

Difference between cable protector Black Line and Red Line

The Black Line cable protector has a maximum axle load of 4.7 tonnes and is designed for use as a drive-over bridge for cars, trucks and forklifts. For the highest demands and continuous use in outdoor areas ( ) as well as when using the cable protector as protection against heavy traffic (e.g. semi-trailers), we recommend our premium cable protector Red Line.

Both models of Cableguard cable protectors at a glance:

	cable protector black line	cable protector red line
Max. axle load	4.7 t	9.1 t
Height	5.0	4.6 cm
Width	44.5 cm	50.2 cm
Lid colour	black	red
Housing colour	red	black
Weight	10.0 kg	11.7 kg
Dielectric strength	110 kV	220 kV
Dimensions of cable ducts	5 channels 3.4 cm wide, 3.2 cm high	4 channels 3.2 cm wide, 2.6 cm high, middle channel 3.9 cm wide, 2.6 cm high

Further cable protectors and hose bridges from allbuyone

Our cable protectors differ mainly in their load capacity and weight. Our range of cable protectors includes drive-over bridges designed for a wide variety of requirements.

• cable protector ranger
• Cable protector ranger angle element
• Cable protector Ranger halfround
• cable protector red line
• Yellow Jacket Classic cable protector
• hose bridge

Installation of the Black Line cable protector

The modular design of the Black Line cable protector enables safe and stable routing of cable protection ducts in any length. The high-quality and stable connecting elements simply need to be placed on top of each other. They lock into place automatically. To ensure that the connecting elements fit together seamlessly, make sure that there are no major uneven areas or height differences between the individual plastic cable protectors. If the cable protector is laid on a very smooth floor, rubber mats can be placed under the cable protector for stabilisation if necessary.

The silicone residues left over from production are best removed with a mixture of water and detergent. This ensures that the cable protectors are not slippery and offer ideal support.

Cable protector Black Line - Safety instructions

The Black Line cable protector has a maximum load capacity of 4.7 t per axle at 20°C. These specifications refer to the use of the Black Line cable protector on level and solid surfaces. If the cable protector is used on soft or sloping floors, the load capacity may be lower. In such cases, it is recommended to test the load capacity of each cable and hose overrun protection before use.

Cable protector Black Line - apply for approval

In general, the responsible authority should be contacted before using a cable protector. If the cable protector is used as overrun protection in public road traffic, the relevant area must be marked with hazard warnings in accordance with official regulations . Official approval may also be required .

Cable protector Black Line for event requirements

At festivals, concerts and sporting events, the robust Black Line cable protector is used to cover, guide and protect loose cables lying on the ground. At large events, it is unavoidable that cables from loudspeaker systems, audio and stage equipment are laid across visitor and traffic routes. The Black Line cable protector is ideal as overrun protection for cables and to protect cables from abrasion and crushing.

The plastic cable protectors also help to organise cables: the cables are laid clearly in the 5 channels without becoming tangled. Last but not least, the Black Line cable duct minimises the risk of accidents. Cable harnesses are always a tripping hazard on visitor walkways and in backstage areas. The side edges of the Black Line cable protector are flattened and can be easily crossed. Thanks to its ribbed surface and non-slip cover, the overrun protection is slip-resistant even when wet. Of course, you can also purchase a fireproof cable duct for indoor events and trade fairs.

Cable protector Black Line on construction sites

The cable protectors can be driven over by loads of up to 4.7 tonnes per axle (axle load) and are therefore ideal for use as overrun protection on construction sites. The cable protectors are suitable for heavy loads and reliably protect cables and wires from forklifts and trucks. Cables that are laid loosely on the floor can become tangled and crushed. Cable protectors for trucks ensure order. With the overrun bridges, you ensure that cables and connected devices are not damaged. As the Black Line cable protector is flattened at the sides, it can be crossed easily by people and construction site vehicles. Buy the cable duct as overrun protection for your construction site to prevent cable clutter and keep your cables clearly laid out and tidy.

Cable protector Black Line easy handling

Cable management is made easier in the truest sense of the word with our new Black Line cable protector. The weight of the cable protector has been reduced to 10 kg. Cavities have been created on the underside of the cable protector and a carrying handle has been incorporated. The connecting elements of the cable protector have been significantly extended. This increases the stability of the connections. This makes it possible to lay the cable protector systems precisely , even over longer distances ( ).

Cleaning and storing the Black Line cable protector

Due to the material properties and design, the floor duct is virtually maintenance-free. Dirt can be easily removed with water (even with a steam jet). The Black Line cable protector complies with ISO 62/ASTM D 570 standards. The overrun protection absorbs less than 1% water, even after 24 hours in a water basin. This virtually eliminates any change in shape.
Please ensure that the product is stored in a dry place. To avoid damaging the connecting elements, the floor duct should not be stored upright.

Cable protector Black Line - various designs

On request, the Black Line cable protector is also available in the following versions with different numbers of cable trays and different dimensions:

• BL1-19 (cable protector with 1 cable duct 6.5 x 1.9 cm)
• BL2-19 (cable protector with 2 cable ducts 6.5 x 1.9 cm)
• BL3-19 (cable protector with 3 cable ducts, 6.5 x 1.9 cm)
• BL5-28-EP (end piece set)
• BL5-28-LT (45° element, left)
• BL5-28-RT (45° element, right)
• BL5-28-X (X-junction)
• BL5-28-Y (Y-splitter)

Red Floor cable protector on request

For individual cable routing, we offer the Red Floor cable protector. This is an overrun protection system that can be assembled from a wide variety of elements. In addition to a variable number of cable trays, different types of ramps and wheelchair ramps can be connected as required. On request, this cable protector can be engraved with a logo on the cover. The following versions of the Red Floor cable protector are available from allbuyone:

• Centre element including ramp RF3-57
• Centre element only RF3-57-C
• Standard ramp male RF3-57-MR
• Standard ramp female RF3-57-FR
• Wheelchair ramp male RF3/5-WMR
• Wheelchair ramp female RF3/5-WFR
• Wheelchair ramp connector male RF3-WMRI
• Wheelchair ramp connector female RF3-WFRI
• End piece, set of 4, blue RF3-Tapered End Ramp
• Centre element including ramps RF5-31
• Centre element, single RF5-31-C
• Standard ramp male RF5-31-MR
• Standard ramp female RF5-31-FR
• End piece, set of 4, blue RF5-Tapered End Ramp
• Connecting element Red Floor 5 to Red Line 5 RF5/RL5-TP
• Connecting element Red Line 5 to Red Floor 5 RL5/RF5-TP

Cableguard cable protectors are available in many other designs on request. You can find an overview in the product catalogue further down this page.

Cable protector Black Line other colours

On request, the cable duct for outdoor use is also available in other colours. Any colour from the RAL and Pantone spectrum can be selected. Only the combinations orange/black and yellow/black are not available for advertising reasons.

Note on manufacturing

Silicone is used to remove the Black Line cable protector from the mould during production. As a result, slight silicone residues may remain on the exterior of the cable protectors. However, these will quickly disappear when the Black Line cable protector is used for the first time.

Buy Black Line cable protector

Order the robust Black Line cable protector from allbuyone – your supplier for event equipment in Munich. In our cable protector online shop, you will find many models, from inexpensive cable protectors to premium cable protectors. The Black Line cable protector is in stock and available for immediate delivery – on request, you can receive the high-end cable protectors with 24-hour shipping. allbuyone – fast order processing, short delivery times. Further product information and personal advice are available at 089 - 122 89 06 22.