barrier stands with belt | red | Barrier stands with belt | belt posts, black-painted steel | red belt, belt length 2 m, extendable | for orderly admission and tasteful guidance systems
GRIP barrier stands – steel
GRIP barrier stands – steel
| Harness colour: | red |
|---|---|
| Material: | steel |
| Belt Length: | 200 cm |
| Total Height of Post: | 98 cm |
| Pole diameter: | 63 mm |
| Base Plate: | diameter 35 cm, flat concrete filled base |
| Scope of Delivery: | 1 stanchion including belt in extract cartridge, cover in pot finish, not assembled |
| Description: | Cast weight and base plate cover are connected from the bottom with M12 screw (19 mm hexagon key) |
The barrier stand with belt from our own brand GRIP Eventbasics is an inexpensive yet high-quality barrier stand. The belt post consists of a post made of black painted steel (height: 98 cm) with a choice of red or black belt (belt width 5 cm, belt length 2 m) and a stable, concrete-filled base plate. With a weight of 9 kg, the barrier post is stable and secure.
Like all our demarcation stands, the steel barrier stand has a 4-way fastening system, which allows any number of posts to be connected to each other using a plug-in system. The barrier posts can be used to quickly and flexibly create crowd control systems and barriers - indoors and outdoors for short periods.
The barrier stands with belt can be purchased here individually. Alternatively, we also have a GRIP barrier stand in brushed stainless steel in our range. We recommend the belt holder wall clip as a matching accessory.
GRIP steel barrier stands with 2 m belt
With the barrier posts, you can create secure barriers and people guidance systems. The combination of a black post and a red or black belt makes the barriers discreet and elegant – ideal for press areas, entrances to clubs, cinemas, etc.
The black-coated steel post and base set is quick and easy to set up and ready for immediate use. The 4-way fastening system allows the barrier to be guided around corners at 90° angles.
GRIP belt posts – technical details and properties
- Material: steel, coated
- 4-way fastening system
- can be expanded as required
- height (post): 98 cm
- Belt length: 2 m
- strap width: 5 cm
- Diameter of base: approx. 35 cm
- Colour of pole: black
- Colour of belt: black, red
- temporarily usable outdoors*
- Weight: approx. 9 kg / unit
Please note: Long-term use of the belt posts outdoors can, depending on the location and weather conditions, lead to rust formation and functional limitations of the mechanics.
Quick to assemble, flexible to use
The barrier post is delivered disassembled and is ready for use in just a few simple steps:
- Place the base plate cover on the cast weight
- Insert the M12 screw (included in the scope of delivery) from below
- place the post on top
- tighten the screw – done!
Barrier stands for crowd control and cordons
Belt barrier posts offer numerous advantages over fixed barrier systems: they are quick to set up and take down, can be connected in any length using the plug-in system, and are versatile. They are also easy to transport and can be stored in a space-saving way.
They are used for cordons in many areas and are suitable for indoor and (temporary) outdoor use, e.g. for / as:
- mobile barrier systems for access areas at events, galas, receptions, trade fairs, etc.
- in the combination black/black, unobtrusive demarcation of press areas at galas, presentations, receptions, etc.
- Pedestrian guidance system at airports for check-in and security control
- Delimit paths / guide visitors, e.g. in museums and exhibitions
- to enclose exhibits in museums
- Barrier system for lounge and VIP areas
- demarcating various security areas
Further demarcation stands from our range
In our shop, you will find a large selection of different barrier posts made of steel, stainless steel and plastic in different colour combinations:
- Barrier stands GRIP - stainless steel
- barrier stand with cord GRIP
- Tensator Tensabarrier Heavy Duty 886
- Tensator Tensabarrier Advance 889
- QueueWay demarcation stands
- belt barrier posts, plastic
- belt posts stainless steel
Buy barrier stands with belt
You can order the GRIP barrier stands with belt and other accessories for barriers with fast shipping. All products in stock are shipped within 24 hours on weekdays, delivery time is 1-2 days, and express delivery is also available on request. The prices of all products include VAT, plus shipping costs.
