cable protector black line | Cableguard | 5 channels, each 3.2 x 3.4 cm | 44.5 x 91 cm | red, black | high-quality cable overrun protection | heavy duty up to 4.7 t per axle | hinged lid | robust, durable, suitable for wheelchairs

The cable protector Black Line is a high-quality drive-over bridge that can be laid quickly due to its light weight of only 10 kg. The overrun protection for cables is laid on construction sites and at events where cables have to be routed over traffic routes and protected from people. Cable protectors protect exposed cables from pulling, crushing, abrasion or other damage caused by heavy traffic, and protect people from electrostatic charge.

The cable protector Black Line is a red and black on-floor cable duct designed for professional use and can be loaded with up to 4.7 t per axle (axle load). The cable duct is 44.5 cm wide and 91 cm long. With 5 cable trays in size 3.2 x 3.4 cm, the drive-over bridge helps to keep cables neatly organised.

The cable protector Black Line has particularly durable connecting elements, which do not slip even on heavily used paths. Another advantage for frequent assembly and disassembly of cable protectors is that the lid is firmly connected to the bridge plate by means of a hinge. Therefore, no components can get lost during transport.

The cable protection bridge made of halogen-free polyurethane is resistant to oil, acids and petrol. It is characterised by a dielectric strength of 110 kV and provides a non-conductive barrier between people and cables. The overrun protection has a non-slip surface in accordance with DIN 51230. This makes the overrun bridges non-slip even when wet.

Black Line cable protectors are fully compatible with Yellow Jackets Bumble Bee cable protectors.

Dimensions of the cable protector Black Line:

• Height: 50 mm
• Width: 445 mm
• Length: 910 mm
• Width (channels): 34 mm
• Height (channels): 32 mm
• Gradient: 23°

Properties of the cable protector Black Line

Black Line cable protectors – high-quality material and certifications

The cable protector Black Line BL5-28 is resistant to oil, acids and petrol and fulfils the CE standard. With a dielectric strength of up to 110 kV, the cable protector Black Line is non-conductive in accordance with the standards 2006/95/EC73/23/EEC, IEC 60529. All cable protectors comply with building material class B2 according to DIN 4102.

Due to their high-quality material, halogen-free polyurethane, and the clean workmanship, Black Line cable protectors are almost maintenance-free. The cable protector black line meets the ISO 62 / ASTM D570 standards. This means that the overrun protection has absorbed less than one per cent water after 24 hours in a water basin. This prevents a moisture-related change in shape (swelling, etc.) of the connecting parts and guarantees a long-term precise fit of the cable protectors.

Labelling cable protectors

You have the option of customising the cable protector with writing or your company logo! The overrun protection can be provided with any motif and any font from a letter height of 5 mm. For an optimal typeface, we recommend a letter size of at least 10 mm. Personalising the cable protector Black Line costs an additional €60 per engraving plate. Personalisation of the cable protector is free of charge for orders of 30 or more.

On request, the underside of the security cable protectors Black Line can be provided with a metal plate . Engravings such as serial numbers can be engraved into this.

Difference between cable protectors black line and red line

The cable protector black line has a maximum axle load of 4.7 t and is designed for use as a drive-over bridge for cars, trucks and forklifts. For the highest demands and constant driving, as well as when using the cable protector as protection against heavy goods vehicles (e.g. articulated lorries), we recommend our premium cable protector red line.

Overview of both Cableguard cable protector models:

Other cable protectors and hose bridges from allbuyone

Our cable protectors differ mainly in terms of load capacity and weight. Our cable protector range includes drive-over cable protectors that are designed for a wide variety of requirements.

• cable protector ranger
• cable protector ranger angle element
• Cable protector ranger halfround
• cable protector red line
• Yellow Jacket cable protectors
• hose bridge

Installing the cable protector Black Line

The modular design of the cable protector Black Line enables safe and stable routing of cable protection channels of any length. The high-quality and sturdily designed connecting elements simply have to be placed on top of each other. They will snap into place automatically. To ensure seamless interlocking of the connecting components, make sure that there are no major bumps or height differences between the individual plastic cable protectors. If the bridge is laid on very smooth ground, rubber mats can be placed under the cable protector to stabilise it if necessary.

"It is best to remove any silicone residue left over from production with a mixture of water and washing-up liquid. This will ensure that the cable protectors are not slippery and provide the ideal grip.

Cable protector Black Line – safety instructions

The cable protector Black Line has a maximum payload of 4.7 t per axle at 20°C. This information refers to the use of the cable protector Black Line on level and solid surfaces. If the cable protector is used on soft or sloping surfaces, the load capacity may be lower. In such cases, it is recommended that each overrun protection for cables and hoses be tested for load capacity before use.

Cable protector Black Line - Apply for approval

In general, the responsible authority should be contacted before using a cable protector:. If the cable protector is used as overrun protection on public roads, the corresponding area must be marked with hazard warnings, depending on the official regulations. It may also require official approval.

Cable protectors Black Line for event requirements

At festivals, concerts and sporting events, the robust cable protector Black Line is used to cover, guide and protect loose cables lying on the floor. At large events, it is unavoidable that cables from loudspeaker systems, audio and stage technology are laid across visitor and traffic routes. The cable protector Black Line is ideal as overrun protection for cables and to protect lines from abrasion and crushing.

The plastic cable protectors also help to organise cables: the 5 channels keep cables neatly in place without the need for knotting. Last but not least, the cable protector Black Line minimises the risk of accidents. Cable harnesses on visitor paths and in backstage areas are a fundamental tripping hazard. The side edges of the cable protector Black Line are flattened and can be easily crossed. Thanks to the ribbed surface and non-slip cover, the overrun protection is also tread-proof when wet. Of course, you can also buy a fire-resistant cable duct for indoor events and trade fairs.

Cable protector black line on construction sites

The cable protectors can be driven over up to a maximum of 4.7 t per axle (axle load) and are therefore ideally suited as overrun protection on construction sites. The cable protectors are suitable for heavy loads and reliably protect cables and lines from forklifts and trucks. Cables that are laid loosely on the floor can become knotted and crushed. Cable protectors for trucks ensure order here. With the drive-over bridges, you ensure that cables and the devices connected to them are not damaged. Since the cable protector Black Line is flattened on the sides, it can be crossed by people and construction site vehicles without any problems. If you buy the cable duct as overrun protection for your construction site, you prevent cable clutter and your cables are laid in a clear and orderly manner.

Cable protector Black Line easy handling

Our new cable protector Black Line makes organising your cables easier in the truest sense of the word. The weight of the cable protector has been reduced to 10 kg. Cavities have been created on the underside of the cable protector, along with a carrying handle. The cable protector's connecting elements have been significantly extended. This increases the stability of the connections. This makes it possible to lay the cable protector systems precisely , even over longer distances.

Cleaning and storing cable protectors Black Line

Due to the material properties and construction, the floor channel is almost maintenance-free. Dirt can be easily removed with water (also with a steam jet). The cable protector Black Line complies with the ISO 62/ASTM D 570 standards. The overrun protection absorbs less than 1% water, even after 24 hours in a water basin. Changes in shape are therefore almost impossible.
Please ensure that the storage area is dry. In addition, to avoid damaging the connecting elements, the floor-mounted trunking should not be stored on end.

Cable protector Black Line - various designs

The cable protector Black Line is also available on request in the following variants with different numbers of cable trays and different dimensions:

• BL1-19 (cable protector with 1 cable duct 6.5 x 1.9 cm)
• BL2-19 (cable protector with 2 cable ducts 6.5 x 1.9 cm)
• BL3-19 (cable protector with 3 cable ducts 6.5 x 1.9 cm)
• BL5-28-EP (end piece set)
• BL5-28-LT (45° element, left)
• BL5-28-RT (45° element, right)
• BL5-28-X (X-junction)
• BL5-28-Y (Y-junction)

Red Floor cable protectors available on request.

For individual cable laying, we offer you the Red Floor cable protector. This is an overrun protection system that can be put together from a wide range of elements. In addition to a variable number of cable trays, various types of ramps and wheelchair ramps can be connected as required. If desired, this cable protector can be engraved with a logo on the cover. You can order the following variants of the Red Floor cable protector from allbuyone:

• Centre element including ramp RF3-57
• Centre element single RF3-57-C
• Standard ramp male RF3-57-MR
• standard ramp female RF3-57-FR
• Wheelchair ramp male RF3/5-WMR
• Wheelchair ramp, female RF3/5-WFR
• wheelchair ramp male connector RF3-WMRI
• Wheelchair ramp connector, female RF3-WFRI
• End piece, set of 4, blue RF3-Tapered End Ramp
• Centre element including ramps RF5-31
• Centre element single RF5-31-C
• Standard Ramp male RF5-31-MR
• standard ramp, female RF5-31-FR
• End piece, set of 4, blue RF5-Tapered End Ramp
• Red Floor 5 to Red Line 5 connection element RF5/RL5-TP
• Red Line 5 to Red Floor 5 connection element RL5/RF5-TP

Cable protectors are available in many other versions on request. You can find an overview in the product catalogue further down on this page.

Cable protectors Black Line other colours

On request, the cable duct for outdoor use is also available in a different colour scheme. Any colour from the RAL and Pantone spectrum can be selected. Only the combinations orange/black and yellow/black are not available for advertising technology reasons.

Note on production

Silicone is used to release the cable protector Black Line from the mould during production. Therefore, slight silicone residues may still be present on the cable protector's outer area. However, these will quickly disappear during the cable protector Black Line's first use.

Buy cable protector black line

Order the robust cable protector Black Line from allbuyone – your supplier for event supplies in Munich. In our cable protector online shop, you will find many models, from affordable drive-over cable protectors to premium cable protectors. The cable protector black line is in stock and available for immediate delivery – on request, you can receive the high-end cable protectors by 24-hour delivery. allbuyone – fast order processing, short delivery times. For further product information and personal advice, call 089 – 122 89 06 22