emergency exit sign Arrow left | Emergency exit sign | 300 x 150 mm | emergency exit arrow left | according to ASR A1.3, DIN EN ISO 7010 | emergency exit sign hard PVC, plastic flame retardant

Escape signs must be present at all times, both at events and in workplaces. In an emergency, the emergency exit sign provides quick and clear orientation: a glance at the combination sign with directional arrow is enough to easily identify the direction of escape to the emergency exit or escape route. The photoluminescent emergency exit signs are suitable for escape route marking where there is no emergency lighting. You can order the following versions in our shop:

• Emergency exit sign, arrow left (E001 incl. additional symbol)
• Emergency exit sign arrow right (E002 incl. additional symbol)
• Emergency exit sign arrow down / direction of travel down
• Emergency exit sign arrow up / direction of travel upwards or straight ahead (according to DIN SPEC 4844-4)

Emergency exit signs Details, material and standard: DIN EN ISO 7010 | ASR A1.3, A2.3 | DIN 67510

The emergency exit sign is made of plastic (PVC) and shows the rescue sign with directional arrow according to DIN EN 7010 for escape route marking. It is a combination sign (symbol and arrow) that complies with the currently valid regulations. Photoluminescent rescue signs are always required as long as no additional emergency lighting is provided. The previous ASR A1.3 specifications for escape routes now apply to all rescue and firesafety signs. In addition, special requirements have been formulated for luminance: DIN 67510-1 :2020-05 Class C, which the photoluminescent emergency exit sign also fulfils.

The wall mounting of the emergency exit sign is extremely simple: the sign can be mounted on the wall, for example, using double-sided tape, but it can also be mounted using screws.

The emergency exit sign fulfils the following standard(s):

• DIN EN ISO 7010 (E002/E001) incl. additional symbol (arrow) according to ASR A1.3
• photoluminescent according to DIN 67510-1
  

Selection of other emergency signs and safety signs

Whether it's an emergency escape sign, fire extinguisher sign or other safety signs, you can order the following additional products from allbuyone:

• Self-luminous door guard emergency exit with emergency lighting according to DIN VDE 0470, emergency light duration 3 hours.
• Fence-banner emergency exit as well as further rescue signs on the fence (assembly point, doctor, first aid, emergency telephone, etc.)
• Flags and signs (hollow chamber, alu dibond) printed with emergency exit pictogram or other rescue signs in individual sizes.
• As well as other mandatory signs, information signs, prohibition signs, firesafety signs (e.g. fire extinguisher sign)

Escape and rescue signs: what do the most important standards say?

Where should you put an emergency exit sign?

An emergency exit is part of the escape route. This should be designed so that people can escape as quickly as possible in panic situations to the outside or to a secure area. According to MVstättVO, escape routes should be at least 1.20 m wide for every 200 people.

ASR A1.3 states: "Safety signs must be clearly recognisable and permanently affixed. Clearly recognisable means, among other things, that safety signs must be affixed at a suitable height – fixed or movable – and that the lighting (natural or artificial) at the point of attachment is sufficient. Prohibition signs, warning signs and mandatory signs must be affixed visibly, taking into account any obstacles at the entrance to the danger area. Particularly in long rooms (e.g. corridors), rescue and/or firesafety signs should be recognisable in the direction of movement at all times." To ensure that the emergency exit sign is clearly recognisable and understandable at all times, the signs must be sufficiently large and correctly positioned in the direction of escape. It is recommended that they be placed at least two metres high, e.g. door guards. On festival grounds , flags at a height of 5 metres have also proven effective. In addition , an emergency exit must not be obstructed and must be accessible at all times through clearly visible escape route signage (keyword: recognition range). The guidelines are specified and checked by the fire department, the trade supervisory board or the building supervisory authority.

Good to know: Emergency exit signs (escape and rescue routes) are only allowed to be combined (pictogram and arrow). Directional arrows alone must NOT be used and are not sufficient as safety signs.

DIN SPEC 4844 -4: provides practical recommendations for use as a technical rule

DIN SPEC 4844-4 is not a standard, but should be seen as a guide for the practical application of rescue signs. It provides suggestions for:

• combining emergency exit signs (E001 and E002) and the additional sign for indicating direction (arrow)
• Information is provided on the light edge,
• the installation of the signs,
• and escape and rescue plans.

Legal notice for emergency exit signs

The emergency exit or emergency exit sign is photoluminescent and meets most official requirements for the safe marking of an escape and emergency exit.

According to BGV A8 §10 sections 2 and 3, only emergency exit signs with lighting may be used for emergency exits in unlit rooms, on unlit surfaces, at the exit or on paths without general lighting. The BGV states that if there is insufficient natural lighting of the safety signs at the installation location, the recognisability of the firesafety signs and escape route signs must be ensured by artificial lighting (e.g. general emergency lighting, battery-powered signs with emergency lighting or photoluminescent signs). This ensures that the rescue sign is easy to read even in the event of nightfall or a power failure. In the event of a power failure, the pictorial symbols remain visible and, thanks to the light-emitting edge, the geometric shape also remains recognisable with photoluminescent products. This results in a significant increase in safety compared to non-illuminated signs. In addition to the use of individual photoluminescent safety signs, it is also recommended to install floor-level safety systems or guidance markings, e.g. using a photoluminescent phosphor tape. Good to know: Photoluminescent safety signs must now at least meet the requirements of DIN 67510-1, Class C.

Where can you buy emergency exit signs?

Of course, in the shop for event supplies, quickly available and at a reasonable price! We have emergency exit and rescue signs, as well as other fire protection, information and warning signs, made of many materials: signs, as well as flags and banners, can be delivered in individual sizes for large-area signage on the open-air grounds. You can also order additional accessories (first aid kit, fire blankets, etc.) from us. Do you have any questions about the product? Or would you like to print an individual sign? Then please contact our team. You can reach us at +49 89-122 89 06 22