pvc tape at 211 | yellow | PVC Tape AT 211 | 19 mm x 33 m | labelling tape | ribbed, inscribable surface | can be removed without leaving residue for four weeks | lasso tape for labelling a lectern
pvc tape at 211
pvc tape at 211
| Colour: | yellow |
|---|---|
| Dimensions: | 19 mm x 33 m |
| Type: | Console (labelling) Tape |
The PVC tape AT 211 is a professional labelling tape from Advance Tapes. It has a matt, ribbed surface that is particularly easy to tear by hand (cross tear) with precise edges. The surface is easy to write on with a marker pen or similar. The tape is adaptable and adapts well to uneven surfaces. In addition, the labelling tape is UV-resistant and waterproof, making it suitable for indoor and outdoor use.
The lasso tape is coated with a pressure-sensitive adhesive, has low initial adhesion and medium adhesive strength (adhesive strength on steel 1.7 N/cm) – completely sufficient as labelling tape. The adhesive tape can be removed without leaving any residue for up to 4 weeks, without leaving annoying adhesive residue on desks, multicores, etc.
You can purchase AT 211 as a 19 mm x 33 m roll in white and yellow. Alternatively, we offer a large range of lasso tapes with other labelling tapes.
| Colour: | yellow |
|---|---|
| Dimensions: | 19 mm x 33 m |
| Type: | Console (labelling) Tape |
PVC tape AT 211 – easy-to-remove labelling tape
The PVC tape is a high-quality labelling tape from Advance Tapes with a corrugated, writable surface. The adhesive tape is easy to tear off and, thanks to its medium adhesive strength, can be removed without leaving any residue for up to four weeks. The AT 211 is not only the ideal solution for labelling desks in lighting and sound engineering – the waterproof adhesive tape is also ideal for labelling and marking cases and film rolls, as well as for position marking in film and TV recordings.
AT 211 Lasso tape: Features
- Design: PVC tape, desk labelling tape
- Type: AT 211
- Brand: Advance Tapes
- Backing: PVC, ribbed, matt surface
- Adhesive: pressure-sensitive, cross-linked rubber resin adhesive
- low initial tack
- medium adhesion
- Adhesive strength on steel: 1.7 N/cm
- Adhesive strength on tape backing: 1.6 N/cm
- Tear resistance: high
- Breaking load: 21 N/cm
- Elongation: 100%
- RoHS compliant
- Temperature range: -5°C to +60°C
- waterproof (when affixed)
- good mould adaptability
- Abrasion resistance: good
- Hand cracks can be made very easily, with precise edges
- Easy to unroll
- can be written on (with a felt-tip pen, e.g. Edding)
- Can be removed without leaving any residue for 4 weeks
Labelling tape – colours and dimensions
- Colour: white, yellow
- Length: 33 m
- Width: 19 mm
- Thickness: 0.15 mm
="green)Further labelling tapes: As an alternative to the grooved labelling tape AT 211, we recommend our spike tapes: the neon tape spike set 12 mm x 18 m with 4 colours and the spike tape mini sets with 5 colours each (dark, light or fluorescent).
Desk labelling tape – easy to tear, can be removed without leaving a residue for 4 weeks
A labelling tape should not be missing in any technician's case. Whether for desks, multicore, microphones, cables or other equipment, the AT 211 is perfect for labelling. Thanks to its grooved surface, it can be torn cleanly and with precise edges. The high-quality adhesive has a medium adhesive strength and can be removed completely without leaving any residue for up to four weeks. This means that your equipment remains clean and adhesive-free after application . Labelling also works very well with an Edding or other marker.
The PVC desk tape]is characterised by its extremely easy hand-tearability. Thanks to the grooves, the cross-tear is absolutely clean. The cross-tear is not possible by hand; scissors are required for this.
Notes on application and removal
Apply the tape to surfaces that are clean and dust-free. Do not touch the adhesive surfaces with your hands. Press the adhesive tape on firmly after application. When removing the adhesive tapes, always proceed slowly and not jerkily. Slowly peel off the desk label tape at a 90° angle. The AT 211 can be removed without residue for up to 4 weeks.
is a high-quality adhesive tape that can be removed without leaving any residue for a very long time. However, we generally recommend that our customers test the tape in an inconspicuous place on the original surface before use.
Storage of labelling tape
Leave the tape in its packaging until use and store it on the roll at a room temperature of approx. +12°C to +25°C and a relative humidity of 60% – for a maximum of one year. Store opened labelling tapes in a clean and dry place.
The manufacturer's liability refers to the perfect condition of the adhesive tape as such. We pass on all information about the product to our customers to the best of our knowledge and belief. However, since individual working conditions (environmental influences, surfaces and processing) are beyond our control, we cannot accept any liability or guarantee for any damage that may occur.
Buy PVC tape AT 211 labelling tape
PVC tape AT 211 at a low price in the allbuyone shop. The price is in euros incl. VAT, plus shipping costs. We also have many special adhesive tapes in stock, such as masking tape, packaging tape, double-sided or aluminium tape and much more. Are you missing a special adhesive tape or do you have questions about the product? Call us and we will find the right adhesive tape for you. For personal advice on adhesive tape and other accessories, call us in Munich on 089 - 122 89 06 22.
- Telephone support and counselling under:
- +49 89 - 122 89 06 22
- Mon - Fri 9 am - 5 pm
- Free Callback