Printed on crowd guidance system | individually printed banner for barrier stand with cord | opaque display fabric 250 g/m² | 1.35 x 1.50 m (WxH) | final format 2-ply in 1.35 x 0.75 m | Cafe Barriere | banner for barrier systems
Banner for barrier stand with cord (display fabric B1 opaque)
Banner for barrier stand with cord (display fabric B1 opaque)
| Material: | Display fabric 250 g/m² |
|---|---|
| Size: | print format open 1,35 x 1,50 m (w x h), final format, 2-layered 1,35 x 0,75 m (w x h) |
| Quality: | flame retardant acc. to DIN 4102-B1 |
Add the finishing touch to your crowd control system with printed banners . The high-quality advertising banners made of 250 g/m² display fabric (opaque) are ideal for using your GRIP barrier stands together with the GRIP banner mounting pole for individual advertising – whether for cafés and restaurants, clubs, hotels, sponsor advertising at events, in VIP areas or at trade fairs.
Banners made of display fabric are high-quality advertising banners that have a blockout coating on the back and thus guarantee absolute light and opacity. The robust polyester fabric has a silk-matt, non-reflective surface with a textile feel. The display fabric is certified as flame-retardant (B1) in accordance with DIN 4102 and is hard-wearing. The material is windproof and only UV-resistant for short periods. The advertising banners are therefore mainlysuitable for indoor use and only recommended for temporary outdoor use.
The banners measure 1.35 x 0.75 m (WxH) and are printed on both sides with your desired motif. The banner has a 7 cm hemstitch (flat) at the top edge . There are eyelets at the bottom corners, which can be used to hang the banner without creases. We print the banner in rich colours using 6c digital printing in high-quality, photo-realistic quality.
An alternative is our café banner made of frontlit (650 g/m²), which is ideal for outdoor use. You can find further accessories in our shop in the category crowd control systems and tensators.
| Material: | Display fabric 250 g/m² |
|---|---|
| Size: | print format open 1,35 x 1,50 m (w x h), final format, 2-layered 1,35 x 0,75 m (w x h) |
| Quality: | flame retardant acc. to DIN 4102-B1 |
people guidance system Banner made of B1 display fabric with double-sided printing
Barrier and advertising medium in one – barrier stands with banners are ideal for cafés, hotels, cinemas, trade fairs and a wide variety of events. The high-quality banners made of display fabric (250 g/m²) impress with their pleasant textile feel, high quality and impressive print quality.
The display fabric has a smooth, silk-matt surface that is also non-reflective. The fabric has a pleasant, textile feel and is flame-retardant in accordance with DIN 4102 (B1). Thanks to its B1 certificate ( ), the banner complies with regulations for public events and can be used at events without any problems. The material is mainly suitable for indoor use and, due to its low UV resistance and textile-like properties, can only be used outdoors on a temporary basis. The banner offers a print area of 1.35 m x 0.75 m (width x height). The robust advertising banner has a 7 cm hem (flat) at the top so that the GRIP banner mounting pole can be easily threaded through. There is an eyelet in each of the bottom corners so that the banner can be stretched without creases .
We print the crowd control banner with your individual design. Printing is carried out using 6c digital printing, guaranteeing colour-intensive, high-resolution print results. The matching GRIP mounting pole and GRIP barrier stand with cord are also available in our product range.
As an alternative for outdoor use, we recommend our café banner made of frontlit PVC floor B1, which you can also find in our shop.
Barrier stands with cord are cut to fit our GRIP banner mounting pole, which is made to fit our GRIP barrier stands with cord. The advertising banners can also be used without GRIP accessories on other crowd control systems. However, in this case we cannot guarantee a perfect fit.
Details about the banner made of display fabric
Display fabric has a smooth, silk-matt surface that is non-reflective and has a textile feel ( ). Find out more about what this high-quality material can do here:
- Type: Display fabric Blockout B1
- Material: polyester fabric with rubberised blockout backing
- Weight (grammage): 250 g/m²
- Surface: silk matt
- Wind permeability: 0%
- Light transmission: none (completely opaque)
- Sound permeability: low
- Weather resistance: short term
- UV resistance: not UV resistant
- Feel: textile, soft and flowing
- Durability: hard-wearing and robust
- Washability: not washable (due to opaque coating)
- Print quality: high resolution, very good quality, intense colours, detailed motif reproduction
- Printing technique: 6c digital printing / sublimation printing (thermal printing)
- Print: double-sided
- No show-through
- Certificate: B1 according to DIN 4102
We reserve the right to print the base material of the 650g tarpaulins from other manufacturers, which is why some specifications may vary.
Display fabric can be used indoors for up to 5 years. Some manufacturers specify UV and weather resistance of up to 3 years. The display fabric is less suitable for outdoor use. For outdoor use, we recommend the frontlit cafe banner from our shop as an alternative.
Banners for crowd control systems are robust advertising tarpaulins that can be used indoors for up to 5 years. Outdoor use is only recommended on a temporary basis.
Dimensions and finishing
- Size (print and final format): 1.35 x 0.75 m (WxH)
- Finishing top edge: with hemstitching (7 cm flat)
- Finishing on sides and bottom edge: straight cut, corners eyelet-fitted at the bottom
Did you know? The display fabric has a black coating on the back. This makes the fabric completely light- and opaque. This separating layer allows for optimal, double-sided display of your motif.
Ordering banners – how it works
- Add the banner for barrier stands with cord to your shopping cart and complete your order.
- After successful purchase, you will receive an order confirmation for your products and a link to our data sheet, which contains important information regarding the layout and transmission of the print data. Please also note our special data sheet for personal guidance system banners.
- You will then receive a second email with an order confirmation and a personalised link for uploading your print data.
- The order confirmation also contains the expected delivery date*.
- We will check your data for printability. We will automatically correct minor corrections for you. If the resolution or similar is incorrect, we will actively contact you. This service is free of charge for you!
- Once the data is correct, your products will go to print.
- The printed banner will be sent directly to you after production.
*Exception for prepayment: In this case, we will only start production of your printed materials after receipt of payment. The delivery date is therefore dependent on receipt of payment.
Please ensure that your print data is carefully prepared. Confirmed print orders are custom-made and cannot be exchanged.
If you have any questions, our team will be happy to advise you personally at+49 89-122 89 06 22 or [email protected]
Additional banners with custom printing
In addition to this banner, our shop also offers a wide range of other advertising banners for a variety of applications:
- Fence banners made from various materials
- Large-format advertising banners in the format of your choice with our online configurator
- Beachflags in many sizes and different versions
Or would you prefer something special? If you are looking for something special, you can customise the material of your choice. In the Event Printing section under Materials, you can create your desired product yourself with just a few clicks using our online configurator.
Buy printed crowd control systems
Buy crowd control system banners in our shop, ideally in combination with high-quality, colour-brilliant banner printing and short delivery times. We also offer all the accessories you could need for the barrier stands with cord or your event. Do you have any questions about our barrier systems or would you like individual advice? Please contact us at+49 89-122 89 06 22.
Gestaltungsmaske Banner 1350 x 750 mm - Displaystoff.ai 
Factsheet Absperrständer-Banner Displaystoff 
Gestaltungsmaske Banner 1350 x 750 mm - Displaystoff.indd 
- Telephone support and counselling under:
- +49 89 - 122 89 06 22
- Mon - Fri 9 am - 5 pm
- Free Callback