yellow jacket cable protector | Heavy-duty cable protector | up to 14.8 t | 91.44 x 50.2 x 4.76 cm | black yellow | cable protector 5 channels, non-slip hinged lid | high-quality outdoor cable protector for construction sites, streets, events | polyurethane

A cable protector protects exposed cables and hoses from mechanical and weather-related damage. The robust Yellow Jacket "Classic" cable protector is trafficable even with heavy loads of up to 14.8 t . The high-quality cable protector is designed for continuous use on the road and on construction sites .

The cable channel is 91.44 cm long, 50.2 cm wide and 4.76 cm high. The Yellow Jacket cable protector has a signal yellow cover with a ribbed anti-slip surface. It is made of polyurethane and contains 5 cable channels for clear organisation of all cables. The overrun protection is fully compatible with the Cableguard Red Line 5 cable protector.

Dimensions of the Yellow Jacket "Classic" cable protector:

• Total length: 91.44 cm
• Total width: 50.2 cm
• Total height: 4.76 cm

Cable protector with 5 cable ducts:

The cable protector provides cable routing for five cables or hoses with a maximum diameter of 2.54 cm. The height of the individual channels is 2.54 cm.

• Channel width: 3.49 cm
• Middle cable channel, channel width: 4.19 cm

Details of the Yellow Jacket "Classic" cable protector

The Yellow Jacket "Classic" cable protector is compatible with the Red Line 5 cable protector.

Thanks to the identical connection system, the Yellow Jacket "Classic" and Red Line cable protector systems can be combined with each other. The Red Line cable protector also has 5 cable channels and a maximum axle load of 9 t.

The Yellow Jacket "Classic" cable protector is resistant to oil, acid and petrol.

The material of the Yellow Jacket cable protector is B2 and therefore has high resistance to oil, acid and petrol.

The Yellow Jacket "Classic" cable protector protects people and cables

The cable protector is designed in yellow and black . Several elements laid side by side create a highly visible warning strip. The cable duct acts as a non-conductive barrier between people and cables. Cable protectors protect against electrostatic discharge and prevent tripping hazards on construction sites and event venues.

Other cable protectors

We offer a wide range of cable protector models for mobile and flexible cable protection. You can find more cable protectors for events and construction sites in our cable protector shop:

• cable protector ranger
• Cable protector Cableguard
• Defender cable protector
• Cable protectors halfround

Cable organisation with the Yellow Jacket "Classic" cable protector

The Yellow Jacket "Classic" cable protector has five wide cable channels for particularly easy and clear cable routing. The cable protectors protect your cables from wear and tear and cable breakage. The channels ensure neat cable routing. Yellow Jackets cable protectors also enable you to organise your cables quickly and easily. The floor-mounted channel helps to prevent tripping hazards caused by exposed cables and hoses.

Areas of application for the Yellow Jacket "Classic" cable protector

The Yellow Jacket "Classic" cable protector is mainly used for event equipment and construction site accessories. The cable protectors are designed for outdoor and indoor use and can be used wherever cables need to be protected from pedestrian traffic, trucks/cars or forklifts. The Yellow Jacket "Classic" cable protector is a robust and durable overrun protection for hoses and cables.

Yellow Jacket cable protectors for construction sites

Cable protectors that can carry heavy loads are preferred on construction sites. With a load capacity of 14.8 tonnes, the Yellow Jacket "Classic" cable protector is a robust overrun protection for use on construction sites. It is impact-resistant and offers your cables reliable protection against dirt and external damage.

The Yellow Jacket "Classic" cable protector for safety at events

The Yellow Jacket "Classic" cable protector is an essential part of your event equipment! It serves as reliable overrun protection for all types of motor vehicles. It also increases the safety of your visitors, as exposed cables often pose a tripping hazard.

Hose bridges at catering events

Hose bridges are alternative cable protectors with wider cable channels. The use of such a hose bridge is particularly recommended in the catering sector, as fresh water, waste water and service water hoses must always be well protected. The hose bridge ensures that the water can be transported safely.

Structure of the Yellow Jacket "Classic" cable protector

The Yellow Jacket "Classic" cable protector consists of 5 cable channels in a housing with a ramp on each of the long sides. The ramps on the cable protectors make it easier for trucks and cars to pass over them. The yellow cover of the cable protector can be easily folded to one side and is very robust. This makes the cable protector particularly suitable for heavy-duty traffic and high demands.

The product is durable thanks to its hard-wearing material and can withstand all weather conditions. The practical locking system allows you to connect an unlimited number of cable protectors together. As the individual elements can be inserted into each other from above, there is no risk of individual parts slipping when driving over the cable protector.

The cable protector rubber: polyurethane

The Yellow Jacket "Classic" cable protector is made of polyurethane. This material has excellent mechanical properties. It is particularly wear-resistant, making the cable protectors ideal for tour operations, frequent use and heavy-duty applications. The surface of the Yellow Jacket "Classic" cable protector is ribbed. The ribbed structure ensures that cable protectors for trucks, cars and even passenger traffic remain slip-resistant and non-slip in wet weather. The cover of the cable protector in a striking yellow colour offers the advantage that the cable protection remains clearly visible even in the dark.

The Yellow Jacket "Classic" cable protector is lightweight, making it quick to lay on any surface and easy to store.

The polyurethane is melted for cable protector production and poured into a mould. To make it easier to remove the product from the mould after hardening, it is coated with silicone. Residues of the silicone may still be present on the cable protectors. This can make them slippery and prevent them from providing the usual grip.
The easiest way to remove the silicone residue is with a mixture of water and washing-up liquid.

Safety instructions for the Yellow Jacket "Classic" cable protector

The maximum load values specified above for the overrun protection refer to the axle load that a Yellow Jacket "Classic" cable protector can carry. The cable protector can bear a weight of approx. 7.393 t per wheel. In addition, the load value is designed for use on firm, straight and dry ground. If you use the Yellow Jacket cable protector on soft and sloping ground, the maximum load weight may be reduced.

If you want to use the cable protector outdoors, e.g. in road traffic, please note: Official approval may be required for cable ducts. The relevant area should be marked with hazard warnings.

Buy the Yellow Jacket "Classic" cable bridge online

You can buy the Yellow Jacket cable protector from allbuyone with excellent service and fast shipping. Our cable protector prices include VAT and exclude shipping costs. Protect your cables and increase the safety of your visitors with the Yellow Jacket "Classic" cable protector from allbuyone as a floor-mounted cable duct. Further information on non-slip floor coverings, cable protectors and the entire shop range in Munich. Contact us on 089 - 122 89 06 22